Zonet ZSR2104WE User Manual page 20

4. On the Firmware Upgrade screen, click the Browse button to find the firmware
upgrade file.
5. Double-click the firmware upgrade file.
6. Click the Upgrade button, and follow the on-screen instructions.
Note: Do not power off the Router or press the Reset button while the
firmware is being upgraded.
Multicast Pass-Through: IP Multicasting occurs when a signal data
transmission is sent to multiple recipients at the same time. Using the Multicast
Pass-Through feature, the Router allows IP multicast packets to be forwarded to
the appropriate computers. Keep the default setting, Enable, to support the
feature, or select Disable to disable it.
MAC Cloning: The Router's MAC address is a 12-digit code assigned to a
unique piece of hardware for identification. Some ISPs require that you register
the MAC address of your network card/adapter, which was connected to your
cable or DSL modem during installation. If your ISP requires MAC address
registration, find your adapter's MAC address by following the instructions for
your PC's operating system.
For Windows 98 and Millennium:
1. Click the Start button, and select Run.
2. Type winipcfg in the field provided, and press the OK key.
3. Select the Ethernet adapter you are using.
4. Click More Info.
5. Write down your adapter's MAC address.
20