Zonet ZSR2104WE User Manual page 17

Router Password:
Changing the password for the AP Router is as easy as typing the password into
the Enter New Password field. Then, type it again into the Re-enter to confirm.
* Click the Apply button to save the setting.
Use the default password when you first open the configuration pages, after you
have configured these settings, you should set a new password for the Router
(using the Security screen). This will increase security, protecting the Router from
unauthorized changes.
VPN Pass-Through:
Virtual Private Networking (VPN) is typically used for work-related networking.
For VPN tunnels, the Router supports IPSec Pass-Through, L2TP Pass-Through,
and PPTP Pass-Through.
• IPSec - Internet Protocol Security (IPSec) is a suite of protocols used to
implement secure exchange of packets at the IP layer. To allow IPSec tunnels to
pass through the Router, IPSec Pass-Through is enabled by default. To disable
IPSec Pass-Through, uncheck the box next to IPSec.
• L2TP - Layer 2 Tunneling Protocol is a protocol used to tunnel Point-to-Point
Protocol (PPP) over the Internet. To allow L2TP tunnels to pass through the
Router, L2TP Pass-Through is enabled by default. To disable L2TP
Pass-Through, uncheck the box next to L2TP.
• PPTP - Point-to-Point Tunneling Protocol is the method used to enable VPN
sessions to a Windows NT 4.0 or 2000 server. To allow PPTP tunnels to pass
17