Table of Contents
Advertisement
[6] Wave Modification
74
First, select the factor to be wave-modified as fol-
lows.
PROCEDURE
@ Select
the
Structure
by
using
the
appropriate Structure Button.
@ Push the Modify Button.
The Display shows "Wave Modify" for a mo-
ment. This indicates that it is now in the Wave
Modify mode.
* While in the Wave Modify mode, no sound can
be generated.
@ Using the Forward Button and the Back-
ward Button, call the factor to be edited.
Now, go to the next procedure for actual Wave
Modification.
[Wave Modification of individual Bank(s)]
You can wave-modify an individual Bank or Banks
of a combined Structure as well as the whole
Structure.
e.g. You can adjust the level (See page 75) of
Bank C of the Structure A/B/C/D, or apply a "Digi-
tal Filter" (page 80) to Banks C D of the Structure
AB/CD.
® Push the Structure Button that corresponds to
the Bank or Banks to be extracted from a
combined Structure, then hit the Enter Button.
P To return the extracted Bank (or Banks) to the
original Structure, push the Structure Button of
that Structure, then hit the Enter Button.
Advertisement
Table of Contents
