Notes on Envelope Parameters
*
When
L1 is set to exactly the same length as
L2, R2 has no meaning.
Points 1 and 2 become
one, and R71 is followed by R3 right away.
When
L3 is set to exactly the same length as L2,
R3 has no meaning. Points 2 and 3 become one.
*
When looped before the curve reaches Point 1,
Point 1 slides to Point 3 in the slope of R3.
Point 1
R
Point 3
The dotted line represents the ENV of the played loop.
* When looped while decaying in the slope of R2,
the slope changes to R3 and slides to Point 3.
oint 3
Level 3
The dotted line represents the ENV
of the played loop.
@ Envelope Rate 1 (R1)
IPEMB:
EMU
RATEL
* With the Wave Parameter "Envelope Velocity
Sensitivity" (explained on page 64) set to high,
the rate can be controlled by the touch sensitiv-
ity of the keyboard.
@ Envelope Level 1 (L1)
LIPRMs
EM
LEWELL
The level of Point 1 can be set from 0 to 127.
@ Envelope Rate 2 (R2)
PRE
EMU
RATES
The Envelope
Rate 2 (the slope from Point 1 to
Point 2) can be set from 0 to 127.
* With the Wave Parameter "Envelope Velocity
Sensitivity" (on page 64) set to high, the rate
can be controlled by the touch sensitivity of the
keyboard.
63