Table of Contents
Advertisement
* The digital filtering is a form of processing
achieved by the internal computer, therefore, it
cannot be performed while the keyboard is be-
ing played.
* The filtered sample cannot be restored again.
Please be sure to make a backup QD before
filtering the sample.
To use two filters at the same time, take the
following procedure twice.
Take step © on page 74, selecting any Structure
you like.
Take steps @ and @, selecting one of the four fil-
ters.
LP
F=
16k
R=668
Fress
EHMTER
LP2
F=
18k
R="
Fr
ENTER
LFi-
F=8.1k
R=888
Fre
EHMHTER
@ Set the Cutoff Frequency and the Resonanse,
using the Alpha Dial, and ® (or <) Button.
The range of cutoff frequency varies depending on
the sampling frequency of the sample; 0.1 to 10
kHz at 30 kHz sampling frequency, and 0.1 kHz to
5 kHz for 15 kHz sampling.
® Push the Enter Button.
When the memory is rewritten with the filtered
data, the Display returns to the Playing mode indi-
cation.
Error
When this error message is indicated, the select-
ed Structure is irrelevant, therefore, cannot be
digital-filtered. Select the appropriate Structure by
pushing the corresponding Structure Button then
the
Enter
Button.
Then
repeat
the
whole
procedure.
Advertisement
Table of Contents
