Roland S-220 Owner's Manual page 72

2. Saving more information ~
The following settings can be saved onto a disk as
well as sound data, wave parameters, perform-
ance parameters, and split points.
© Output Level (See page 38.)
@ Output Level Control with Aftertouch (See page
39.)
MIDI Channel for each Structure (See page 44.)
Sound Range for each Structure (See page 45.)
Output Level for each Structure (See page 46.)
Output Level Control with Aftertouch for each
Structure (See page 47.)
@ MIDI Basic Channel (See page 12.)
@ MIDI Mode (See page 11.)
@ All the other MIDI Functions (See page 89 to
92.)
All the necessary procedures are the same as for
Basic saving on page 70,except that the F2 Button
should be pressed before pushing the Save But-
ton in step @.
» * When loading without performance parameters
(explained on page 38), the parameters listed
above are not loaded.
72
QD Types