Advertisement
ADVANCED
FEATURES Menu: CONVERGENCE
CONVERGENCE
Menu
(Figure 47)
Your Mksubishi
TV has three picture
tubes which
need to be aligned
to properly
converge
the
projected
light beams on the screen.
Each picture
tube projects
a single color of red, blue or green.
During production,
your TV was carefully
adjusted
to properly
align these colors.
However,
moving
the TV, the TV's location
in relation
to the Earth's
magnetic
poles, and the passage
of time can cause
these adjustments
to change.
As a special
feature,
you have the ability to adjust
the red and blue light beams
in reference
to the
fixed green light beam. This process
is called
convergence.
There are two separate
memories
for
convergence.
One, for SD 480i/480p
signals;
the
other for HD 1080i signals.
SD convergence
should
be adjusted
while watching
an SD source
and HD
convergence
should
be adjusted
while watching
an
HD source.
Th_
T\/_-_hnl
dH h_ fl dh/_^_rrr_r_
I In h_fnr_
_Hh I¢finn
Convergence.
Turn the TV On and wait at least 30
minutes
before starting
adjustments.
Convergence
Screen
(Figure 48)
When the Red and Blue crosshairs
are properly
converged,
the center-screen
crosshairs
will appear
white.
You can use A V, _, or I_ to move the
Red and Blue crosshairs.
Press VIDEO to switch
between
Red and Blue.
Press AUDIO
for the
Advanced
Convergence
screen.
T
T
Figure 47. CONVERGENCE ,menu
Figure 48.
Convergence screen
Advanced
Convergence
(Figure 49)
After adjusting
the Red Convergence
and Blue
Convergence,
you can fine-tune
your TV by
adjusting
the Red and Blue convergence
at 64
individual
points.
Move the flashing
bracket
to a
position
needing
adjustment
by pressing
A, v, _,
or_',
Figure 49.
Advanced Convergence
screen
53
Advertisement
