Mitsubishi Electric WD-52525 Owner's Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. Projection TV
  5. WD-52525
  6. Owner's manual
Mitsubishi Electric WD-52525 Owner's Manual

Mitsubishi Electric WD-52525 Owner's Manual

Projection television
Hide thumbs Also See for WD-52525:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
Owner's Guide
Projection Television Models
WD-52525
WD-62525
TM
TM
visit our website at
www.mitsubishi-tv.com
TV Information:
Use this space to record the model and serial numbers of
your television. This information is on the back of your TV.
Model number
Serial number

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Electric WD-52525

Summary of Contents for Mitsubishi Electric WD-52525

  • Page 1 Owner’s Guide Projection Television Models WD-52525 WD-62525 visit our website at www.mitsubishi-tv.com TV Information: Use this space to record the model and serial numbers of your television. This information is on the back of your TV. Model number Serial number...
  • Page 2 Custom cabinet installation must allow for proper air circulation around the television. STAND REQUIREMENT CAUTION: Mitsubishi TV Model WD-52525 is for use only with Mitsubishi stand, model MB-52525. Mitsubishi TV model WD-62525 is for use only with Mitsubishi stand model MB-62525. Use with other stands is capable of resulting in instability causing possible injury.
  • Page 3 FCC Declaration of Conformity Product: Projection Television Receiver Models: WD-52525 and WD-62525 Responsible Party: Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road Irvine, CA 92618-1904 Telephone: 949-465-6000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 4: Table Of Contents

    Contents Chapter 1 Television Overview TV Accessories......................10 Special Features......................10 Front Control Panel ...................... 11 Front Panel Inputs and Media Card Slots ..............12 Back Panel........................13 Chapter 2 Connecting External Devices & NetCommand® Setup ..............16 Wall Outlet Cable or Cable Box..................17 CableCARD™...
  • Page 5 Chapter 4 IEEE 1394 Devices and NetCommand® Controlled Recordings IEEE 1394 Devices and NetCommand® Control ............48 Adding IEEE 1394 Devices Automatically..............49 Device Selection Menu....................51 Using the DEVICE MENU Button to Display Menus............52 Using the Guide Button to Display ChannelView™ and Menus........53 NetCommand®...

  • Page 6: Important Safeguards

    IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference.

  • Page 7: Replacement Parts

    IMPORTANT SAFEGUARDS , continued 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

  • Page 8: Our Thanks

    Our Thanks... Thank you for choosing Mitsubishi as your premier Home Entertainment provider. This Owner’s Guide describes the features and functions of your Mitsubishi widescreen, high definition TV. We urge you to examine this Owner’s Guide to become familiar with the innovative features and operations this unique television offers.
  • Page 9 Chapter . . . Television Overview TV Accessories ................10 Special Features ................10 Front Control Panel..............11 Front Panel Inputs and Media Card Slots .......12 Back Panel .................13...

  • Page 10: Tv Accessories

    TV Accessories Special Features Please take a moment to review the following Your new High Definition widescreen television has many special features that make it the perfect center list of items to ensure that you have received of your home entertainment system, including everything including: High Definition DLP™...

  • Page 11: Front Control Panel

    Front Control Panel � ��� � ����� � �� � ������ ���� ����� ������ ������ � � ����� ������ ���� ������ ����� ���� ������ ����� The buttons on the Front Control Panel highlighted in gray are duplicated on the remote control. The top row of labels show the control functions when there are no TV menus displayed on the screen.

  • Page 12: Front Panel Inputs And Media Card Slots

    Front Panel Inputs and Media Card Slots Input 3 This input can be used for convenient connection of a camcorder or other video device to the TV. Please note that if you connect to the S-VIDEO terminal, the VIDEO terminal is deactivated.

  • Page 13: Back Panel

    Back Panel IEEE1394 INPUT/OUTPUT IR EMITTER VGA/SVGA/XGA/ NetCommand 720p AUDIO MONITOR 60 Hz VIDEO S-VIDEO OUTPUT L(MONO) Analog Audio AUDIO 2 ANT-2 AUDIO/VIDEO 1 AUDIO DTV/ CABLE/ INPUT-1 VHF/ HDMI ANT-1 INPUT-2 M-LINK MAIN INPUT COMPONENT-1 YPbPr (480i/480p/720p/1080i) M-LINK CONTROL/ RS-232C DIGITAL COMPONENT-2...

  • Page 14: Digital Audio Output

    Back Panel, continued Monitor Output Audio/Video 1 should be connected to Use this input to connect to EIA/CEA-861 compliant a VCR for recording. Monitor Output Audio 2 should devices such as a high definition receiver or DVD be connected to your A/V receiver for home theater player.

  • Page 15: Connecting

    Chapter . . . Connecting External Devices & NetCommand® Setup........16 Wall Outlet Cable or Cable Box ............17 CableCARD™ Technology.............18 Single Lead Antenna..............19 Separate UHF and VHF Antennas ..........19 VCR Video and Audio to an Antenna or Wall Outlet Cable ..20 VCR Video and Audio to a Cable Box ..........21 A/V Receiver or Stereo System............22 Satellite Receiver or Other Device with S-Video ......22...

  • Page 16: External Devices & Netcommand® Setup

    Connecting External Devices & NetCommand ® Setup NetCommand is able to control many current audio and video devices by sending remote control signals from the TV to each device through IR emitters. Additionally, it is also able to learn the remote control signals used by most audio video devices not already in the TV’s memory.

  • Page 17: Wall Outlet Cable Or Cable Box

    Connecting a Wall Outlet Cable or Cable Box Cable Box Wall Outlet Cable (compatible with PIP/POP) Figure 2 (can be used with a CableCARD™) 3 coaxial cables and one two-way RF splitter are required. Figure 1 These are not included with the TV. It is very important to connect the incoming cable for your primary viewing source to ANT-1, It is very important to connect the incoming...

  • Page 18: Cablecard™ Technology

    CableCARD™ Technology CableCARD Technology Using a CableCARD After inserting a CableCARD into the TV back CableCARD is a nationwide system standard that panel CableCARD slot and powering On the TV, allows your local cable TV provider to supply you with the initialization process begins.

  • Page 19: Single Lead Antenna

    Connecting a Lead Antenna or Separate UHF and VHF Antenna Lead Antenna Separate UHF and VHF Antenna (not for use with CableCARD™) Figure 4 Figure 3 A UHF/VHF combiner is required. This is not included with A 300-Ohm to 75-Ohm transformer is required. This is not the TV.

  • Page 20: Vcr Video And Audio To An Antenna Or Wall Outlet Cable

    Connecting VCR Video and Audio to an Antenna or Wall Outlet Cable VCR Video and Audio to an Antenna or Wall Outlet Cable Figure 5 5. Connect either an S-Video or Video cable from A two-way RF splitter, 3 coaxial cables, right and left audio VIDEO OUT on the VCR back panel to INPUT-1 cables and a S-Video or Video cables are required.

  • Page 21: Vcr Video And Audio To A Cable Box

    Connecting VCR Video and Audio to a Cable Box VCR Video and Audio to a Cable Box cable connects to the L (left) channel. If your VCR Figure 6 is mono (non-stereo), connect only the white (left) A two-way RF splitter, 4 coaxial cables, right and left audio cable.

  • Page 22: A/V Receiver Or Stereo System

    Connecting an A/V Receiver or Stereo System or a Satellite Receiver or Other Device with S-Video A/V Receiver or Stereo System Satellite Receiver or Other Device with Figure 7 S-Video A digital audio cable and stereo audio cables are required. The Figure 8 digital audio cable is provided.

  • Page 23: Dvd Player With Component Video

    Connecting a DVD Player with Component Video or Computer with a PC Monitor Output Computer with a PC Monitor Output DVD Player with Component Video Figure 10 Figure 9 1. Connect PC Monitor Out from the computer to PC Component video cables and audio cables are required. Input on the TV back panel using a PC compatible These are not included with the TV.

  • Page 24: Dtv Receiver With Component Video

    DTV Connectors and Adaptors Connecting a DTV Receiver with Component Video DTV Connectors and Adaptors on the DTV receiver to Input-DTV on the TV back Figure 11 panel, matching the correct connections: The TV back panel has 5 RCA-type connectors for the Input-DTV.

  • Page 25: With Rgb, Hv Video

    Connecting a DTV Receiver with RGB, HV Video DTV Receiver with RGB, HV Video Figure 13 TV back panel A coaxial splitter, RGB, HV and audio cables are required. IEEE1394 INPUT/OUTPUT These are not included with the TV. IR EMITTER VGA/SVGA/XGA/ NetCommand 720p...

  • Page 26: M-Link Control

    Connecting M-Link Control RS-232C Connection, or a HDMI or DVI Device M-Link Control RS-232C Connection DVI Device Figure 14 Figure 16 A 9 pin RS-232C cable is required. This is not included with A DVI-to-HDMI cable or DVI/HDMI adaptor and HDMI cable the TV.

  • Page 27: Ir Emitter Netcommand

    ® Connecting the IR Emitter NetCommand IR Emitter NetCommand® Figure 17 A quadruple IR Emitter cable is included with the TV. 6. If you are not going to be using all emitter ends, The emitters connected to these jacks are used by the place the unused ends behind the devices so that NetCommand system to control other devices such as they cannot send signals to the remote control...

  • Page 28: Compatible Ieee 1394 Devices

    Connecting Compatible IEEE 1394 Devices Compatible IEEE 1394 Devices When Connecting IEEE 1394 Devices It is possible to connect devices to the TV that have IEEE • Do not loop the last device in the chain back 1394 connectors but are not compatible with the TV or with to the TV.
  • Page 29 Connecting Compatible IEEE 1394 Devices, continued Connection Styles 4-Pin Style vs. 6-Pin Style Connectors There are two different connection styles that can be There are two different types of connectors used for used when connecting IEEE 1394 devices. Use the IEEE 1394 terminals and cables, a 4-pin and a 6-pin style that fits your network of audio/video products.

  • Page 30: Helpful Hints

    Connecting: Helpful Hints Q My VCR (or other device) does not have two sets of stereo audio outputs. How can I connect this device’s audio to both the TV and the A/V Receiver? A. There are two solutions: 1. Connect the single set of stereo audio outputs to the TV only. Use Edit NetCommand® to change the setup of this device.
  • Page 31 Chapter . . . ® NetCommand Setup and Editing Using the Remote Control with NetCommand® ......32 Remote Control Functions: Overview..........33 Remote Control Functions: Operation ...................34 Care ....................34 Sleep Timer................34 NetCommand® OnScreen Buttons..........35 3D Graphical Viewpoint® Menu System ........36 NetCommand® Initial Setup............37 Edit NetCommand®...

  • Page 32: Using The Remote Control With Netcommand

    Using the Remote Control with NetCommand ® Below is a list of several manufacturers devices tested and shown to be compatible with NetCommand. These devices can be controlled without changing the setting of the remote control from TV to another product. NetCommand may be able to operate additional models since many manufacturers use the same control signals to operate some or all of the models they offer.

  • Page 33: Remote Control Functions: Overview

    Remote Control Functions: Overview Overview Figure 1, following page 1. Slide Switch: Selects A/V product to be 18. V-CHIP: Turns On or Off the V-Chip Lock. controlled by the remote control. Select TV for 19. INFO: Displays on-screen summary of the current NetCommand®...

  • Page 34: Remote Control Functions

    Remote Control Functions:Operation and Care, Sleep Timer Care For Best Results from the Remote Control: CABLE/DBS/DTV AUDIO • Be within 20 feet of the equipment. • Do not press two or more buttons at the same POWER time unless instructed. SUB/CANCEL •...

  • Page 35: Netcommand® Onscreen Buttons

    NetCommand® Setup On Screen Buttons To use the TV’s NetCommand feature, you need to provide some detailed information during the setup of your Mitsubishi TV. You must define the manufacturer of the devices that are connected to the television, or learn the IR code remote control signals for the device connected.

  • Page 36: Graphical Viewpoint® Menu System

    3D Graphical Menu System Your TV also has Mitsubishi’s exclusive 3D Graphical on-screen operating system, which provides on-screen information for menu choices and changes, using the TV’s remote control. Remote Control Buttons Menu Screens The following buttons on your remote control help you A picture (icon) will be highlighted on the menu screen when selected with the ADJUST navigate within the...

  • Page 37: Netcommand® Initial Setup

    NetCommand Initial Setup ® IMPORTANT You may use your TV without setting up NetCommand. You may also set up NetCommand at a later time by choosing the NetCommand menu from the Main menu, then selecting Initial. When you first power On your new Mitsubishi TV, the 1.

  • Page 38: Finish Screen

    NetCommand ® Initial Setup, continued Finish Screen Note: If you selected “Other” for any of the device names, the TV can “Learn” Figure 5 the connected device by following the Edit To complete the NetCommand setup, select Finish NetCommand instructions. For many device from the Finish screen.

  • Page 39: Edit Netcommand® Add An A/V Receiver

    Edit NetCommand®, Add an A/V Receiver A/V Receiver Screen 3. Select “Other”, skip Learn and select Next>. This will allow the device to appear and will allow Figure 6 NetCommand to switch inputs to use this device. If your A/V Receiver manufacturer was not listed, and However, NetCommand will not be able to control you selected “None”...
  • Page 40 Edit NetCommand , Add an A/V Receiver, continued ® A/V Receiver Input Learn Screen A/V Receiver Learn Screen Figure 8 Figure 9 NetCommand can now learn the remote control 1. Press ADJUST on the TV remote to select the signals used to select each input on the A/V receiver. check box for each function to be learned.

  • Page 41: Monitor Out To Avr Screen

    Edit NetCommand ® , Add an A/V Receiver, continued Finish Screen Name Screen Figure 10 Figure 12 The Name screen allows you to change the default To finalize your selections and complete the A/V name for the A/V receiver to a custom name of up to receiver setup, select Finish from the Finish screen.

  • Page 42: Add Devices

    Edit NetCommand , Add Devices ® Mitsubishi’s NetCommand allows you to edit your home theater configuration. You can add new devices, change device settings and connections, delete devices and learn remote control IR signals not already in NetCommand memory. Edit NetCommand Screen Figure 13 Use these settings to change the NetCommand setup If you selected Edit when you were at the Finish screen,...
  • Page 43 Edit NetCommand ® Add Devices, continued [Device] Screen 3. Select “Other”, skip Learn and select Next>. This will allow the device to appear and will allow Figure 15 NetCommand to switch inputs to use this device. If you selected “None”, during initial setup, then you However, NetCommand will not be able to control can add a device.
  • Page 44 Edit NetCommand®, Add Devices, continued Figure 16. [Device] Learn screen Figure 18. Name screen [Device] Advanced Learn Screen Figure 17 After learning the basic device keys, the [Device] Advanced Learn screen allows you to learn any special keys for your device. Most common IR remote control signal formats can be learned by NetCommand.

  • Page 45: Vcr For Recordings Screen

    Edit NetCommand ® , Add Devices, continued The screens described below may not be necessary for your device setup. If they do not display automatically on-screen, they are not required. VCR for Recordings Screen Input-DTV Connection Screen Figure 20 Figure 22 Select the VCR to use for recording.

  • Page 46: Change Devices

    Edit NetCommand ® , Change or Delete Devices, Finish Screen Finish Screen Change Device Screen Figure 26 Figure 24 To finalize your selections and complete the Selecting Change from the Setup menu screen, NetCommand setup, select Finish from the Finish displays the Change screen.
  • Page 47 Chapter . . . IEEE 1394 Devices and NetCommand® Controlled Recordings IEEE 1394 Devices and NetCommand® Control ......48 Adding IEEE 1394 Devices Automatically........49 Device Selection Menu..............51 Using the DEVICE MENU Button to Display Menus ....52 Using the Guide Button to Display ChannelView™ and Menus..53 NetCommand®...

  • Page 48: Ieee 1394 Devices And Netcommand® Control

    IEEE 1394 Devices and NetCommand® Control See pages 28-29 for information regarding compatible IEEE 1394 devices and connection styles. The TV is not able to control IEEE 1394 devices that use other types of control protocols. Incompatible digital audio, video and/or control information will still be able to pass from one device through the TV to another device on the network.

  • Page 49: Adding Ieee 1394 Devices Automatically

    Adding IEEE 1394 Devices Automatically Adding IEEE 1394 Devices Name for 1394 Device Screen Figure 2 Automatically If you choose to add the discovered IEEE 1394 device, When an IEEE 1394 device is connected into the the Name for 1394 Device screen will appear. Name TV network and is powered On, the new device will the device or use the default name that appears automatically announce its presence.

  • Page 50: Connection Screen

    Adding IEEE 1394 Devices Automatically, continued Connection Screen IEEE 1394 Device Type Screen Figure 5 Figures 3 and 4 Select the TV input that you used when you connected If the new IEEE 1394 device is also connected using the video or S-Video cables. You may also select the TV analog inputs, you will need to define the device type.

  • Page 51: Device Selection Menu

    Device Selection Menu When you press DEVICE on the TV’s remote control, the Device Selection menu (Figure 7) displays. If NetCommand® has not been setup, the Device Selection menu allows you to select an input for viewing. If NetCommand is setup, the Device Selection menu allows you to select the device for viewing, select audio from the TV speakers or A/V receiver, power compatible devices On or Off, and verify the destination of signals.

  • Page 52: Using The Device Menu Button To Display Menus

    Using the Device Menu Button to Display Menus Device Menu Moving Through Other CableCARD Screens In addition to CableCARD menus, other CableCARD Pressing the remote control’s DEVICE MENU button application screens may display and require you displays the menu for the current device source. to make additional selections.

  • Page 53: Using The Guide Button To Display Channelview™ And Menus

    Using the GUIDE Button to Display ChannelView™ and Menus The GUIDE Button Depending on the device you are currently viewing, pressing GUIDE allows you to see different program guides or menus. Devices (1394 or IR Controlled) To record a current program, press REC (record) when your program choice is highlighted on the program For NetCommand compatible satellite receivers and list in ChannelView.

  • Page 54: Netcommand® Controlled Recordings

    NetCommand ® Controlled Recordings Record To Setup Recording Now Figure 12 Can be used when viewing Antenna 1 or 2, an IEEE Your TV is able to start and stop recordings 1394 device, or a non-recording traditional device. automatically and send the signals from one external playback device to another external recording device.
  • Page 55 NetCommand Controlled Recordings, continued ® Copy-Protected Material Record List Screen When attempting to record copy-protected material, Figure 13 the Record functions of the NetCommand and IEEE To see a list of all currently programmed recordings, press 1394 systems may be prevented or stopped. If you GUIDE while viewing the Record To screen.

  • Page 56: Netcommand® Controlled Peer-To-Peer Connections

    NetCommand ® Controlled Peer-to-Peer Connections What is a Peer-to-Peer Connection? Setting up a Peer-to-Peer Connection Figure 14 A peer-to-peer connection is a current connection and A peer-to-peer connection allows the IEEE 1394 devices cannot be setup as a delayed connection. in your TV network to talk to each other without the further need of TV intervention once the peer-to-peer To establish a peer-to-peer connection:...

  • Page 57: Direct Vcr Recording From An Antenna Or Cable Screen

    Direct VCR Recording from an Antenna or Cable Source, A/V Disc Search, Track List Screen Direct VCR Recording from an Track List Screen Figure 15 Antenna or Cable Source: When viewing an A/V Disc, press GUIDE to display Pressing REC (record) on the TV’s remote control will its Track List.

  • Page 58: Pc Viewing

    PC Viewing PC Input Figure 16 To display your PC screen on the TV, first, connect it Hint: You may want to set the computer’s screen saver to the TV’s back panel (see Chapter 2). You will then to a pattern, to display after several minutes, as a be able to select it through the Device Selection Menu.

  • Page 59: Mediacommand™ And Media Card Playback

    MediaCommand™ and Media Card Playback Warning: Some media cards available on the market are not properly certified to follow the card type specified and cannot be used by the Card Reader. If you experience problems with the reading of your file, please transfer your files to a properly certified card.
  • Page 60 Media Command™ and Media Card Playback, continued NOTE: During MP3 or WMA7 audio playback, For MP3 or WMA7 Playlist Menu: audio from the cards will be sent to the A/V Figure 19 receiver as analog audio. Digital out is not 1.
  • Page 61 Chapter . . . TV Menu Screen Operations Main Menu Choices ...............62 Setup Menu ..................63 NetCommand® Menu..............64 Antenna Menu ................65 Time Menu ..................67 Captions Menu ................68 V-Chip Lock Menu .................70 AudioVideo Menu ................73 A/V Settings Descriptions.............74 Operation of PIP and POP.............76...

  • Page 62: Main Menu Choices

    Main Menu Choices Time Menu Setup Menu Figure 4 Figure 1 Manually set the time for the TV, or select Auto and Use the Setup menu to select English or Spanish as the TV will automatically set the time based upon the language for the menus and on-screen displays.

  • Page 63: Setup Menu

    Setup Menu Setup Menu PerfectColor™ (Manual Color Balance) Figure 8 Figure 9 Figure 8. Setup Menu, NetCommand Option Figure 9. PerfectColor Menu, Manual Color Correction Language The manual PerfectColor option is only available when Display the on-screen menus in either English or Auto (Color Balance) is not checked.

  • Page 64: Netcommand® Menu

    NetCommand® Menu NetCommand Menu Remote Control Transport Buttons Figure 10 Transport buttons (rewind, ���� ����� ��� play forward, stop, pause ��������� ������� ������� ���� and record) on the remote ������� ������ ���� control are located in the bottom section of the remote control.

  • Page 65: Antenna Menu

    Antenna Menu Antenna Menu Channel Figure 13 Channels can be changed in 3 ways: 1. By pressing ADJUST to select the channel. 2. By pressing CH for channels already in memory. 3. Directly entering the number. With so many current and potential channels, the number range is greatly expanded.

  • Page 66: Sqv (Superquickview)

    Antenna Menu, continued: SuperQuickView™ (SQV) SQV (SuperQuickView™) SQV (SuperQuickView™) Using The Remote Control Using The Menu Screen Figure 14 Viewing and changing SQV banks using the remote SQV (SuperQuickView™) allows you to put together lists control: of your favorite channels from Antenna 1 and Antenna 1.

  • Page 67: Time Menu

    Time Menu (XDS) time data, typically a PBS channel. The Auto selection will automatically retrieve the correct time Setting the Clock and date information from this channel. Be aware that You may choose to manually or automatically set if a channel displays incorrect time information, it is the clock that your TV will use for recording or timer because of information sent from the broadcaster and functions.

  • Page 68: Captions Menu

    Captions Menu: Analog and Digital Captions Background Captions Menu To make the analog closed captions easier to read, you Figure 17 For analog channels broadcasters can send either can choose to display the background color as either Standard or Text closed captioning. Standard Closed black or gray behind the captions.
  • Page 69 Captions Menu, continued: Customizing Digital Settings Fonts • Translucent - TV program is visible behind the text You can customize the text of digital captions by • Opaque - Solid color text; blocks the TV program selecting the font of your choice. The available Font options are as follows: •...

  • Page 70: V-Chip Lock Menu

    V-Chip Lock Menu: Passcode V-Chip To view a V-Chip blocked program or to watch the program during a scheduled lock time, you must Select V-Chip Lock to perform the functions listed enter your 4-digit passcode or change the channel below. V-Chip allows you to Block or Allow programs to an unlocked program.
  • Page 71 V-Chip Lock Menu: V-Chip Definitions V-Chip Signal Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be blocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on the remote control.

  • Page 72: Lock By Time

    V-Chip Lock Menu, continued Lock By Time Front Button Lock Figure 22 Front Button Lock lets you disable controls on the Lock by Time allows you to lock the entire TV during front panel to prevent anyone from changing settings specific hours.

  • Page 73: Audiovideo Menu

    AudioVideo Menu AudioVideo Video Mute Figure 23 Video Mute lets you display a blue background when no signal is being received on Inputs 1-3, Components 1-2 and Input DTV. Black Enhancement Select On to enhance the contrast in bright scenes for better picture quality.

  • Page 74: A/V Settings Descriptions

    A/V Setting Descriptions: Audio NOTE: The effects of the Audio Settings of Bass, Treble, Balance and Surround affect the sound heard through the TV speakers only. • Mono: Reduces background noise and should Analog and Digital Audio Setting be used when receiving a weak stereo audio A slider will display on-screen for most settings.

  • Page 75: Video Settings

    A/V Setting Descriptions: Video detect and apply film decoding correction for Video Settings signals that originated on 24 frames per second film ◊ Contrast cameras and then were converted for broadcast to Provides a slider to adjust the white-to-black level. 30 frames per second video.

  • Page 76: Operation Of Pip And Pop

    Operation of PIP and POP You can display programs from analog channels, analog inputs or devices as Picture-In-Picture (PIP) and Picture- Outside-Picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on Ant-1 and will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but cannot be the sub-picture.
  • Page 77 Chapter . . . Special Features Display Formats ................78 Device Control with NetCommand® ...........81 Appendix A: Bypassing the V-Chip Lock........83 Appendix B: Specifications............85 Appendix C: Remote Control Programming Codes ....87 Appendix D: On-Screen Information Displays......90 Appendix E: NetCommand® Specialized Device Keys .....91 Appendix F: Cleaning and Service ..........92 Appendix G: Diamond Shield™...

  • Page 78: Display Formats

    Display Formats This is a widescreen TV (also known as a 16:9 TV). This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow screen images (called 4:3 aspect ratio) you will encounter. While there will never be a perfect solution for displaying a narrow image on a wide screen, Mitsubishi offers several display formats to choose from.

  • Page 79: Tv Display Formats

    TV Display Formats ORIGINAL SIGNAL ORIGINAL SIGNAL Anamorphic DVD Non-anamorphic or SD 4:3 TV Display TV Display Standard Standard (not recommended, distorted) (recommended) not available for Expand HD, SD 16:9 or not available for analog 720p, 1080i Expand HD, SD 16:9 or analog 720p, 1080i (recommended for letterboxed) (not recommended, distorted)

  • Page 80: Pc Display Formats

    PC Display Formats Signal Format Reduce 1 Reduce 2 Standard Zoom Original Pixel Count VGA 4:3 640 X 480 640 x 480 848 X 648 WVGA 16:9 848 X 480 All 4 formats 848 X 480 1149 X 648 available for above inputs SVGA 4:3 800 X 600...

  • Page 81: Device Control With Netcommand

    ® Device Control with Net Command NetCommand Compatible Traditional Devices (Analog) When Device Selection Menu is Displayed and the Device is Highlighted (Yellow Outline) A/V RECEIVER CABLE BOX/DBS Device Remote Control Button POWER Power On/Off Power On/Off Power On/Off Power On/Off (toggle) (toggle) (toggle)
  • Page 82 ® Device Control with Net Command , continued IEEE 1394 Devices When Device Selection Menu is Displayed and the Device is Highlighted (Yellow Outline) TUNER/ A/V DISC DVCR AMPLIFIER Device CABLE BOX/ Remote Control Button POWER Power On/Off Power On/Off Power On/Off Power On/Off (toggle)

  • Page 83: Appendix A: Bypassing The V-Chip Lock

    Appendix A: Bypassing the V-Chip Lock: Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip Lock menus. If you forget your passcode, you can view the locked TV without entering your passcode.
  • Page 84 This page intentionally blank...

  • Page 85: Appendix B: Specifications

    Appendix B: Specifications From time to time, Mitsubishi may offer software updates to expand the features or operation of this TV. When these updates are available they will be announced on our web site, Mitsubishi-tv.com. If you return your Owner’s registration card, with your model and serial number, you may receive written notification of available software updates.
  • Page 86 IEEE 1394, Qty 3 IEEE 1394 Four Pin type Terminal, S400 Audio/Speakers 10 watt x 2, 5” coaxial speakers Dimensions WD-52525 H 37-1/4” x W 49-5/8” x D 17-3/8”, 132lbs WD-62525 H 43-5/8” x W 58-5/16” x D 19-7/8”, 165 lbs Power Consumption 275 watts Net command®...

  • Page 87: Appendix C:remote Control Programming Codes

    Appendix C:Remote Control Programming Codes A/V Receivers IMPORTANT A/V Receiver Brand Code The remote control may return to its MITSUBISHI 010, 011, 012, 013, 014 AIWA 225, 226, 241 initial setting when the batteries are BOSE changed. You may need to reprogram. B&K DENON 234, 235, 236, 245, 246, 359, 361...
  • Page 88 Appendix C: Remote Control Programming Codes, continued Cable Boxes, continued VCRs SCIENTIFIC ATLANTA 112, 113, 194 VCR Brand Code SIGNATURE 119,124,125,126,127,120,121,122 MITSUBISHI 001, 060, 067, 068, 061, 062, 002 SLMARK 105,101 AKAI 049, 034, 035, 036 SPRUCER AUDIO DYNAMIC STARCOM 119,124,125,126,127,120,121,122 BELL&HOWELL 025,...
  • Page 89 Appendix C: Remote Control Programming Codes, continued When your remote control has been programmed to operate another manufacturer’s product, the function performed on each layer can vary. The most common IMPORTANT functions are: Some manufacturers may change their products, or they may use more than one •...

  • Page 90: Appendix D: On-Screen Information Displays

    Appendix D: On Screen Information Displays When you turn on the TV, change Devices, change Channels or when you press the INFO button on the remote control the TV will display the current status. Below are the most common displays; please note that seldom or never do all of the different status indicators appear at the same time.

  • Page 91: Appendix E: Netcommand® Specialized Device Keys

    Appendix E: NetCommand® Specialized Device Keys CABLE VCR DVD LEARNING FUNCTION NAME ON TV RECEIVER or DBS SCREEN REMOTE CHECKBOX NAME Power* Power On or Power On/Off POWER** Power (Off)* Power Off POWER** Volume Up Volume Up Volume Down Volume Down Mute Mute MUTE...

  • Page 92: Appendix F: Cleaning And Service

    Appendix F: Cleaning and Service IMPORTANT DO NOT use any kind of abrasive cleaner on the surface of the TV screen or Diamond Shield™. Cleaning Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines: First, turn off the TV and unplug the power cord from the power outlet.

  • Page 93: Appendix G: Diamond Shield™ Removal

    Appendix G: Diamond Shield™ Removal The Diamond Shield is installed by the factory to enhance your television viewing experience. If you want to remove the Diamond Shield, please follow the steps listed below: To Remove the Diamond Shield: 1. While wearing soft cotton gloves, loosen the sides of the Diamond Shield by pressing a small plastic card (the size of a standard credit card or a clean, plastic, putty knife) into the middle of the...

  • Page 94: Appendix H: Filter Cleaning

    Appendix H: Filter Cleaning Cleaning the Dust Filter Clean the filter annually and whenever you replace the lamp cartridge. Tools needed: Phillips screwdriver 1. Turn the television off and unplug the AC cord. 2. Locate the dust filter on the left side panel of the TV.

  • Page 95: Lamp Replacement

    Appendix H: Lamp Cartridge Replacement Before you replace the lamp cartridge please note the following: CAUTION: If the television is on, press POWER to turn off and allow the television to cool for one hour before attempting to replace the lamp cartridge. LAMP LIFE The light source for this television is a lamp, which is part of a lamp cartridge assembly.
  • Page 96 Appendix H: Lamp Cartridge Replacement, continued Replacing the Lamp Cartridge Tool needed: Phillips screwdriver 1. Turn the television off and unplug the AC cord. 2. Remove the front speaker grill by gently pulling on each side. The grill will snap out. 3.

  • Page 97: Troubleshooting

    Troubleshooting Problem Possible Solution The TV remote control does not work. • Check that the batteries are installed correctly. • Check that the selected switch is set to “TV”. • Be no further than 20 feet from the TV when using the remote control. •...
  • Page 98 Troubleshooting, continued Problem Possible Solution The sound does not match the screen picture. • NetCommand® is setup incorrectly. • The TV’s “Listen to:” setting may be set to SAP. • If using stereo or A/V receiver speakers, check their input selection. •...
  • Page 99 Troubleshooting, continued Problem Possible Solution The TV Speaker icon or A/V Receiver icon is • Select the Change setting from the Edit NetCommand menu, and grayed out and not selectable. then select the device (for example VCR). Once the Connection screen is displayed, check if the audio checkbox is selected for the TV input and/or AVR input.
  • Page 100 Troubleshooting, continued Problem Possible Solution The IEEE 1394 device cannot be selected. • The device may be busy, either recording or a peer-to-peer connection has been established. Cancel the recording or peer-to-peer connection. DEVICE MENU button does not display a menu. •...
  • Page 101 Troubleshooting, continued Problem Possible Solution ChannelView program recording failed. • Connection and compatibility issues with IEEE 1394 (FireWire®) digital devices. This may include too many Firewire devices in use at one time, or the recording device not understanding the record command.

  • Page 102: Additional Information

    Additional Information Demo Mode This TV has a demo mode for use in a retail store. To turn On/Off, press the following buttons in sequence: MENU, 0, QV, 0 IMPORTANT Do not attempt to update the software of this TV with software or cards that are not provided by or authorized by Mitsubishi Digital Electronics America, Inc.

  • Page 103: Index

    Index IEEE 1394 Devices 14, 28-29 Lead Antenna 19 NetCommand® IR Emitter 27 RS-232 14, 26 S-Video 22 Satellite Receiver 22 Separate UHF and VHF Antenna 19 Disc Search 57 Stereo System 22 Memory Reset 73 Wall Outlet Cable 17 Receiver, add 39-41 Copy-Protected Material 55 Reset 11...
  • Page 104 Recording Now 54 Record List Screen 55 Icon Order, Viewing, Changing 64 Record To IEEE1394 List 53 Adding Automatically 49-50 Menu 53 and NetCommand® Control 48 Setup 54 Compatible Devices 28 Remote Control Device Type Screen 50 Buttons 33, 36 Input/Output 12, 14 Care 34 Name 49...

  • Page 105: Warranty

    MITSUBISHI TV SOFTWARE END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”).
  • Page 106 Mitsubishi DLP™ Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television that if purchased from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a.
  • Page 107 c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY COVERAGE. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you.
  • Page 108 Website: www. mitsubishi-tv.com Email: MDEAservice@mdea.com To order replacement or additional remote controls, lamp cartridges or Owner’s Guides, call 800-553-7278 For questions, call Consumer Relations at 800-332-2119 © 2004 Mitsubishi Digital Electronics America, Inc. Written and Printed in the U.S.A 871D407B10...

This manual is also suitable for:

Wd-62525

Table of Contents