Advertisement
Connecting
an Audio Receiver
Note:
The TV back panel and connections
shown
here are for reference
oniyand may
vary by model,
Stereo
Audio
System
(Recommended
for shelf units or A/V receivers without
digital audio inputs)
(Figure 7)
1.
Connect
the audio cables
from AUDIO
MONITOR
OUTPUT
on the TV back panel to TV
IN or AUX IN terminals
on the back of the audio
system.
The red cane connects to the R (right) channel
The white cabb connects to the L (Heft)channel
.
.
Turn off the TV's speakers
through
the AUDIO/
VIDEO SETTINGS
Menu, page 55.
Set the audio system's
input to the TV or AUX
position
to hear the TV's audio through
your
stereo system.
TVback
panel
[]
Audio system back panel section
Figure
X Connecting
the Stereo
Audio
System.
A/V Receiver
(Figure 8)
1.
Connect
either a video cane
or an S=Video
cable (but not both) from VIDEO MONITOR
OUT
on the back of the A!V receiver
to VIDEO INPUT=
1 or INPUT=2 on the TV back panel.
Note:
If the A/V receiver
outputs
an onscreen
menu, this connection
allows you to view the
receiver's
menu on the television.
2.
Connect
a video cable from VIDEO MONITOR
OUTPUT
on the TV back panel to VIDEO TV IN
on the back of the A/V receiver.
3.
Connect
a set of audio cables from AUDIO
MONITOR
OUTPUT
on the TV back panel to
AUDIO TV IN on the back of the A/V receiver.
The red cable connects to the R (right) channel
The white cable connects to the L (left) channel
AV Receiver
(back panel section)
@
@
TV
back
panel
(section
detaff}
only
type
White
Red
S=Video
Yellow
Note:
Please see your
A!V receiver Owner's
Guide for more detailed
connections.
Figure 8. Connecting
the A/V Receiver.
17
Advertisement
