Mitsubishi Electric WT-42315 Owner's Manual page 46

V=CHIP Menu: Setting Up and Using V=Chip Lock
Passcode
Figure 29. First time entry to the V-CHIP LOCK aft
models
Figure 30. Re=entry to the V-CHiP LOCK all
models
Setting Up the V-CHIP LOCK
Passcode
(Figure 29)
SeUect V=CHRP LOCK from the MAIN menu
for first time setup or after you have canceUed
your passcode. You will see the screen shown
in Figure 29. Use the number buttons on
the remote control to input a new four=digit
passcode, then press ENTER.
Before pressing ENTER, you can deUete a
character and move back one character by
pressing CANCEL, or Ueave the passcode
screen by pressing MENU or HOME.
Entering the Passcode
(Figure 30)
Input your passcode as shown in Figure 30 (Note:
Text
changes
from "a new" to
"your" passcode).
The next time you select V=CHIP LOCK from the
MAIN menu, you will see this screen.