Table of Contents
Advertisement
BitStorm 6200 Router User's Guide
3.2
Configuring Your PC
Before you start to access the CPE via Ethernet, you must configure your PC's TCP/IP address to be
192.168.1.x, where x is any number between 3 and 254. The subnet mask must be 255.255.255.0. Your
CPE's default IP address is 192.168.1.1.
3.2.1
Windows XP:
1. In the Windows task bar, click on the Start button, and then click on Control Panel.
2. Double-click on the Network Connections icon.
3. In the LAN or High-Speed Internet window, right-click on the icon corresponding to your
network interface card (NIC) and select Properties. (Often this icon is labeled Local Area
Connection). The Local Area Connection dialog box is displayed with a list of currently
installed network items.
4. Ensure that the check box to the left of the item labeled Internet Protocol (TCP/IP) is
checked, and click on
.
Figure 3.2 Network Connections in
Windows XP
5. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled Use
the following IP address and type 192.168.1.x (where x is any number between 3 and 254)
and 255.255.255.0 in the IP address field and Subnet Mask field, respectively.
16
.
Figure 3.3 Local Area Connection Properties in Windows XP
Advertisement
Table of Contents
