Table of Contents
Advertisement
5.3
User Access
User name "user" (general user) can access to the CPE to view configuration and statistics, and update
the CPE's software. You may change its password by selecting Management -> User Access. Enter the
password for user name "user" twice and click on
5.4
Reboot CPE
You may reboot the CPE by selecting Management -> Reboot Router. Just click on
reboot.
.
Figure 5.3 User Access Setup
Figure 5.4 Reboot the CPE
BitStorm 6200 Router User's Guide
to
27
Advertisement
Table of Contents
