Configuring Ds0 Channels; Displaying Ds0 Channel Assignments; Allocating Ds0 Channels From The Dte Drop/Insert Interface To The Network Interface - Paradyne 3162 Quick Reference

Configuring DS0 Channels

To allocate DS0 channels, begin by defining the logical channel configuration for the
network interface, and then the DTE Drop/Insert (DSX-1) interface, and then any ports,
if desired.

Displaying DS0 Channel Assignments

"
Procedure
To display the DS0 channel allocation:
1. From the Main Menu screen, select Configuration.
2. From the Load Configuration From screen, select Current.
3. From the Configuration Edit/Display screen, select Cross Connect.
4. From the Cross Connect screen, select DTE To Network Assignments.
The DTE to Network Assignments screen appears.
5. To view specific port assignments on the Network Channel Display screen, select
NetChan at the bottom of the DTE to Network Assignments screen.
Allocating DS0 Channels from the DTE Drop/Insert Interface to the
Network Interface
"
Procedure
To allocate DS0 channels from the DTE Drop/Insert (DSX-1) interface to the network
interface:
1. From the Main Menu screen, select Configuration.
The Load Configuration From screen appears.
2. From the Load Configuration From screen, select Current.
The Configuration Edit/Display screen appears.
3. From the Configuration Edit/Display screen, select Cross Connect.
The Cross Connect screen appears.
4. From the Cross Connect screen, select DTE To Network Assignments.
The DTE to Network Assignments screen appears.
5. Assign the DS0 channels from the DTE Drop/Insert (DSX-1) interface to the
network interface.
6. Select Save to store these settings in nonvolatile memory.
5