Paradyne 6200 User Manual page 15

BitStorm 6200 Router User's Guide
RESET
LINE DEFAULT CONSOLE LAN POWER
03-17488
Figure 3.1 Overview of Hardware Connections
You should verify that its LEDs are illuminated as shown in Table 3.1
Table 3.1 LED Indicators
This LED: ...should be:
POWER Solid green to indicate that the device is turned on. If this light
is not on, verify that the power adapter is attached to the CPE
and is plugged into a power source.
Solid green to indicate that the device can communicate with
STATUS
your ISP via ADSL, or flashing when the device is trying to
connect to your ISP.
LINE Flashing when the device is sending or receiving data over
the ADSL connection.
PC Solid green to indicate that the device can communicate with
your PC via Ethernet, or flashing when the device is sending
or receiving data over Ethernet.
Test Off under normal operation.
15