Table of Contents
Advertisement
BitStorm 6200 Router User's Guide
10. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP),
and then click on
11. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled Use
the following IP address and type 192.168.1.x (where x is any number between 3 and 254)
and 255.255.255.0 in the IP address field and Subnet Mask field, respectively.
12. Click on
Panel.
3.2.3
Windows Me:
1. In the Windows task bar, click on the Start button, point to Settings, and then click Control
Panel.
2. Double-click on the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click on the Network icon, and then
select Properties.
The Network Properties dialog box is displayed with a list of currently installed network
components. If the list includes Internet Protocol (TCP/IP), the protocol has already been
enabled, in which case you can skip to Step 11.
4. If Internet Protocol (TCP/IP) does not appear as an installed component, click on
.
5. In the Select Network Component Type dialog box, select Protocol, and then click
.
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click on
.
You may be prompted to install files from your Windows Me installation CD or other media. Follow
the instructions to install the files.
8. If prompted, click on
9. After restarting your PC, double-click on the Network and Dial-up Connections icon in the
Control Panel.
10. In Network and Dial-up Connections window, right-click on the Network icon, and then
select Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click on
12. In the TCP/IP Settings dialog box, click in the radio button labeled Use the following IP
address and type 192.168.1.x (where x is any number between 3 and 254) and
255.255.255.0 in the IP address field and Subnet Mask field, respectively.
13. Click on
Panel.
3.2.4
Windows 95, 98:
1. In the Windows task bar, click on the Start button, point to Settings, and then click Control
Panel.
2. Double-click on the Network icon.
The Network dialog box is displayed with a list of currently installed network components. If the
list includes TCP/IP, the protocol has already been enabled, in which case you can skip to Step 9.
18
.
twice to confirm and save your changes, and then close the Control
to restart your computer with the new settings.
twice to confirm and save your changes, and then close the Control
.
Advertisement
Table of Contents
