Table of Contents
Advertisement
OPERATION
26
4
Press the
a
or
b
step.
Display
AO
A1
Az
•
means the functionis not used.
AO
5
Press the Set/Clear button to set the function.
When the
icon displayed, the function has
^
been applied.
NOTE
• 1 step : The power input is setting around α A to
operate the appliance.
• 2 step : The power input is setting around β A to
operate the appliance.
•
will be blinking on the indoor unit, when the
─│
air conditioner needs more Ampere for
operating than setting ampere's operation
range.
- If you change the step by pressing
blinking will be disappeared.
─│
button to select the desired
Step
Normal
1 step
2 step
button,
^
- Display icon may not appear depending on
the model accordingly.
• Capacity may decrease when I-Control Ampere
mode is selected.
• Some functions may not be supported,
depending on the model.
• Name of the function may differ depending on
the model accordingly.
• How to use I-CONTROL AMPERE
Displa
Model
y
Norma
l
APNW
A1,
24GS1
10A(α)
S1
A2,
7A(β)
Above recommended figures are based on
laboratory testing under following conditions:
- Standard voltage (220 V
- Properly insulated room
- Suitable A/C tonnage for room size
- Correctly installed unit with R410A gas and
vacuum work
Auto Dry Function (On Some
Models)
You can reduces the moisture remaining inside the
air conditioner when the air conditioner is turned
off.
When pressing the
t
function, evaporator in indoor unit will be
automatically dried as showing counting 00 to 99
on its display panel.
After indicating 99 on the display panel, the unit
will be automatically turned off.
Tempe
Ampere Range
rature
Range
National Power
up to
54 °C
9.0 ~ 11.9
Amperes
6.0 ~ 8.9
up to
Amperes
46 °C
[
15 %)
button after setting the
Advertisement
Table of Contents
