Using Wireless Remote Control; Operating With The Wireless Remote Control; Cooling, Auto, Dehumidification, Heating, Fan Mode - LG ZPNQ60GT3A0 Owner's Manual

Using Wireless Remote
Control
Operating with the Wireless
Remote Control
• Aim at the signal receptor on the floor standing
type air conditioner when operating.
• Block a strong light over the signal receptor with
a curtain or etc. so as to prevent the abnormal
operation. (ex: electronic quick start, ELBA,
inverter type fluorescent lamp)
• The remote control signal can be received at a
distance of up to about 7 meters.
• Be sure that there are no obstructions between
the remote control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location
exposed to direct sunlight, or next to a heating
unit, or other heat source.
Cooling, Auto,
Dehumidification, Heating, Fan
Mode
You can change the operating mode when the
appliance is turned on.
1
Turn the appliance on.
2
Press the Mode button repeatedly to select the
desired mode.
• Heat Pump Model
Each press changes the modes in this order:
Cooling ~ Auto
Heating ~ Fan.
• Cooling Only Model
~ Dehumidification
Each press changes the modes in this order:
Cooling
Fan.
Icon
Cooling Mode
Cool air blows from the air outlets.
Auto Mode
The product adjusts the airflow
automatically.
Dehumidification Mode
This function removes moisture in
indoor air.
Heating Mode
Warm air blows from the air
outlets.
Fan Mode
This function circulates the air
without heating or cooling it.
3
Press the
a
temperature.
~
• Cooling Mode: Set the temperature from 18
7 to 30
OPERATION
~ Auto ~ Dehumidification
Description
or button to set the desired
b
7 .
21
~