Using The Auto I-Control Ampere Function (Optional); Using The Comfort Sleep Function (Optional) - LG AMPN34T4 Owner's Manual

Using the Auto I-Control
Ampere Function (Optional)
This function is for operate ICA function
automatically.
Auto ICA (Auto I-Control Ampere) function is
• Detecting Power supply type by Auto ICA
Device.
• Which power has supplying now among
national power or private generator power.
• During cooling or heating operation, if the
power supply type has been changed to
private generator power, the product will
automatically operate the ICA function.
1
Press button and hold it about 3
seconds to On/Off this function.
• The is displayed for a while on
some indoor unit.
• When the Auto ICA Function change to
ON or OFF, you can hear melody. (When
function ON beep melody 3 times(Beepx3)
and when function OFF beep melody 1
times(Beep))
2
If you use a private generator to supply
power, the Auto ICA device automatically
detects the power source and switches
modes. To control the power to the air
conditioner, press the Ampere Ctrl. button
the same way you would with the manual
ICA function.
NOTE
• It is not displayed on the wireless remote
control.
• You can operate this function without turning
the air conditioner on.
• This function On/Off anytime, but operation
available with Cooling and Heating Mode.
• This function could be operation correctly
when the Auto ICA Device installed and the
device connect to National Power supply.
• If the function is turned on in Fan mode, there
is no display change, only sound is heard.
24
Using the Comfort Sleep
Function (Optional)
This function operates the air conditioner
automatically to make the comfortable sleep
environment.
1
Turn the appliance on.
2
Press button.
are displayed on the display
• ,
screen.
NOTE
• This function is available with Cooling Mode.
• The vane stops swing and sets indirect airflow
angle, after 30 minutes from start even though
the room temperature doesn't decrease to
optimal temperature to sleep.
• It is possible that a comfortable sleep
environment is different according to the
people.
• Only is displayed on the display screen
when setting the comfort sleep function during
Energy Control / I-Control Ampere function.
EN