Child Lock Operation Function; Auto Dry Function - LG APNQ24GS1A4 Owner's Manual

Child Lock Operation Function

1
Press the and high
for 3 seconds.
2
During child lock operation,
- Whenever you press any button on
display panel, it will immediately display
"CL", which means display panel is
locked.
- All the button on the indoor unit display
panel will not work.
- But the button on the remote controller
will be operated.
3
Press the and high
for 3 seconds again. The unit will respond
with beep. child lock operation will
removed
MODE

Auto Dry Function

1
Auto dry function can be setted/released
by manipulating indoor unit button or
remote control.
2
When pressing the
the function, evaporator in indoor unit will
be automatically dried as showing counting
00 to 99 on its display panel .
simultaneously
simultaneously
button after setting
OPERATING INSTRUCTIONS
3
After indicating 99 on the display panel,
the unit will be automatically turned off.
* Auto dry function is released at initial
state as standard.
For Setting Auto Dry Function
If manipulating indoor unit, press the
button and button simultaneously for 3
MODE
seconds.
If manipulating remote control for Cooling
Only model, press
The indoor unit will respond with beep once
and indicate "SC" on its display panel. Then
Auto dry function will be set.
For Releasing Auto Dry Function
If manipulating indoor unit, press the
button and MODE button simultaneously for 3
seconds.
If manipulating remote control, press
button.
The indoor unit will respond with beep twice
and Auto dry function will be removed.
MODE
NOTE
!
Some functions may not be supported,
depending on the model.
15
button.