Table of Contents
Advertisement
Picture noise appears.
• Clean the disc.
• If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality. If you still experience
problems after checking your
connections, connect your unit directly
to your TV's S Video input (page 19).
• Keep the speaker cords away from the
antennas.
• When you play back a VIDEO CD
recorded in a different color system
from the one you set to the system, the
picture image may be distorted
(pages 19, 48).
• When you connect your TV to the
COMPONENT VIDEO OUT jacks and
play back video-based software in
progressive signal format, some
sections of the image may appear
unnatural due to the conversion process.
• Set the color system to match your TV
(pages 19, 48).
The aspect ratio of the TV screen
cannot be changed even though you
can set "TV TYPE" under "VIDEO
SETUP" in the Setup Menu when you
play back a wide picture.
• The aspect ratio is fixed on your DVD
VIDEO and video file.
• If you connect the unit with the S Video
cord, connect directly to the TV.
Otherwise, you may not change the
aspect ratio.
• Depending on the TV, you may not
change the aspect ratio.
Messages do not appear on the TV
screen in the language you want.
• Select the language you want for the on-
screen display in "OSD" under
"LANGUAGE SETUP" in the Setup
Menu (page 47).
GB
94
The language for the sound track
cannot be changed.
• Multilingual tracks are not recorded on
the DVD VIDEO being played back.
• The DVD VIDEO prohibits changing
the language for the sound track.
The subtitles language cannot be
changed.
• Multilingual subtitles are not recorded
on the DVD VIDEO being played back.
• The DVD VIDEO prohibits changing
the subtitles.
The subtitles cannot be turned off.
• The DVD VIDEO prohibits turning off
subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the
DVD VIDEO being played back.
• The DVD VIDEO prohibits changing
the angles.
Tuner
The radio presetting is canceled.
• The power cord is disconnected or a
power failure occurred for longer than
half a day. Redo "Listening to a preset
radio station" (page 52).
There is severe hum or noise.
("TUNED" or "ST" flashes in the
display)
• Set the proper band and frequency
(page 52).
• Connect the antenna properly (page 16).
• Find a place and an orientation that
provide good reception, then set up the
antenna again. If you cannot obtain
good reception, we recommend that you
connect a commercially available
external antenna.
• The supplied FM lead antenna receives
signals along its entire length, so make
sure you extend it fully.
Advertisement
Table of Contents
