Table of Contents
Advertisement
5
V
Press
select a language, then press
ENTER.
The setting is selected and the
"VIDEO SETUP" display appears on
the TV screen.
Tips
• The selected language is for "OSD",
"MENU" and "SUBTITLE".
• The selectable language is different
depending on the area.
6
V
Press
select the setting that matches
your TV type.
If you have a 4:3 standard TV:
Select "4:3 LETTER BOX" or
"4:3 PAN SCAN" (page 47)
If you have a wide-screen TV or a
4:3 standard TV with wide-screen
mode:
Select "16:9" (page 47)
7
Press ENTER.
The setting is selected and the
"SPEAKER SETUP" display appears
on the TV screen.
8
V
Press
select the front speaker distance
from your listening position,
then press ENTER.
Repeat this step to adjust the center and
surround speaker distance.
The setting is selected and "QUICK
SETUP is complete." appears on the
TV screen.
The system is ready for playback.
To perform further speaker settings,
see "Setting the speakers – SPEAKER
SETUP" (page 50).
If you want to change each setting
individually, see "Using the Setup
Menu" (page 46).
GB
24
v
or
repeatedly to
v
or
repeatedly to
v
or
repeatedly to
If you make a mistake
Press ., then select the item again.
To quit "QUICK" setup
Press
DISPLAY.
To recall "QUICK" setup settings
1
Press
DISPLAY when playback
is stopped.
The Control Menu appears on the TV
screen.
2
V
v
Press
or
repeatedly to select
(SETUP), then press
ENTER.
3
V
v
Press
or
repeatedly to select
"QUICK", then press ENTER.
Note
The guide message appears at the bottom of the
TV screen when you turn on the system for the
first time or after performing "RESET"
(page 96).
Advertisement
Table of Contents
