White Wash; Adjusting Osd Transparency; Sleep Timer - Zenith P40V24 Installation And Operating Manual

White W ash
White W ash
- White Wash removes permanent images from the screen.
- Set White Wash 'On' until fixed image disappears.
1. Press the menu button and then use
G
2. Press the button and then use
G
3. Press the button and then use
• When you select On, the screen changes to white.
4. Press the enter button.
Adjusting OSD T ransparency
Adjusting OSD T ransparency
- To make the menus clear or opaque
1. Press the MENU button and then use
G
2. Press the button and then use
G
3. Press the button and then use
•
The adjustment range of Transparency is 0 ~ 5.
4 Press the OK button.
Sleep T imer
Sleep T imer
- Sleep timer turns the monitor off at the preset time.
- Press the sleep button to select the number of minutes. The display
by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected.
- When the sleep time you want is displayed on the screen, don't press the sleep button. After 20 seconds, the
screen display disappears and sleep time is set.
a. To check the remaining sleep time, press the sleep or enter button just once.
b. If you turn the Monitor off after setting the sleep timer, the setting is erased. The sleep timer will then have to
be set again.
c. To release sleep time setting, press the sleep or
r r 1' is displayed, one minute before the Monitor is due to turn off.
d. '
button to select the
D E
/
D E button to select White Wash.
/
D E button to select On or Off.
/
D E button to select the
/
D E button to select Transparency.
/
F G
/ button to adjust OSD transparency.
F / G button repeatedly to select
menu.
menu.
---
F G
will appear on the screen, followed
---
F G .
Language G
ARC G
Screen Adj. G
Orbiter G

White Wash

White Wash G On
PIP G Off
Transparency G
Set ID G
G
Language
G
ARC
G
Screen Adj.
G
Orbiter
White Wash G
PIP G
Transparency G 5
Transparency
Set ID G
17