Table of Contents
Advertisement
W
atching VCR Setup
W
atching VCR Setup
- When connecting the Monitor to external equipment, match the colors of connecting ports (Video - yellow, Audio (L) -
white, Audio (R) -red).
- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor.
- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regu-
lar VCR to the Video input.
- Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR, if
source is a 16:9 picture format, a fixed image may remain visible on the screen.
- To avoid picture noise (interference), leave an adequate distance between the VCR and monitor
1. Press video/pc button on the remote control and select Video.
(If connected to S-VIDEO, select the S-Video external input source.)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner's manual)
W
atching Cable
TV Setup
W
atching Cable
TV Setup
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV program-
ming. This monitor cannot display TV programming without a TV tuner device or cable TV converter box connected to the
monitor.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
1. Press video/pc button on the remote control to select Video.
2. Tune to cable service provided channels using the cable box.
W
W
atching External
atching External
A/V Source Setup
A/V Source Setup
- When connecting the monitor to an external source, match the colors of A/V input jacks on the monitor with the output
jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.
1. Press video/pc button on the remote control to select Video.
2. Operate the corresponding external equipment. See external equipment operating guide.
W
atching DVD Setup
W
atching DVD Setup
How to connect
- Connect DVD video inputs to Y, P
(480i/480p/720p/1080i) (DVD/DTV INPUT) and audio inputs to Audio
sockets of AUDIO INPUT.
- If your DVD has only S-video jack, connect s-video of DVD to S-video
jacks on the monitor and audio inputs to Audio sockets of AUDIO
INPUT.
How to use
1. Turn on the DVD player, and insert a DVD.
2. Use video/pc button on the remote control to select Component.
Refer to the DVD player's manual for operating instructions.
8
, P
of COMPONENT
B
R
• Component Input ports
You can get better picture quality if you con-
nect DVD player with component input ports
as below.
Component ports of the
Monitor
Video output ports
of DVD player
Y
P
P
R
B
Y
Pb
Pr
Y
B-Y
R-Y
Cr
Y
Cb
P
Y
P
R
B
Advertisement
Table of Contents
