Zenith P40V24 Installation And Operating Manual page 22

07. Contrast (Command:g)
G To adjust screen contrast.
You can also adjust contrast in the Video menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
* Refer to 'Real Data Mapping1' as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Data Min: 00 ~ Max: 64
08. Brightness (Command:h)
G To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
* Refer to 'Real Data Mapping1' as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
Data Min: 00 ~ Max: 64
09. Color (Command:i)
G To adjust the screen color.
You can also adjust color in the Video menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
* Refer to 'Real Data Mapping1' as shown below.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min: 00 ~ Max: 64
10. Tint (Command:j)
G To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64
* Refer to 'Real Data Mapping1' as shown right.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Red: 00 ~ Green: 64
22
11. Sharpness (Command:k)
G To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
* Refer to 'Real Data Mapping1' as shown below.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min: 00 ~ Max: 64
12. OSD Select (Command:l)
G To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
1: OSD on
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0: OSD off
1: OSD on
13. Remote Control Lock Mode (Command:m)
G To lock the front panel controls on the monitor and
remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: off
1: on
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0: off
1: on
* Remote control and front panel controls can be turned
off or on with this feature.
* Real Data Mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 : Step 100
* Real Data Mapping 2
0 : -10
5 : -9
A : -8
2D: -1
32: 0
37: +1
5F: +9
64: +10