Table of Contents
Advertisement
Troubleshooting Checklist
No picture &
No sound
Picture okay but
No sound
The remote control
doesn't work
No or poor color
or poor picture
No output from one of
the speakers
Strange sound from
the Monitor
28
• Check whether the Monitor is turned on.
• Is power cord inserted into wall outlet?
• Plug another product's power cord into the wall outlet where the
Monitor's power cord was plugged in to test the outlet.
G
• Press the VOLUME (
• Sound muted? Press MUTE button.
• Check to see if there is any object between the Plasma Display and
the remote control blocking the remote's IR signal.
• Check to see if the batteries are installed with the correct polarities.
(Refer to p.10)
• Install new batteries. (Refer to p.10)
• Select Colour in the VIDEO menu and press the VOLUME (
ton. (Refer to p.13)
• Keep a certain distance between the Monitor and the VCR.
• Activate any function to restore the brightness of the picture. (If still
picture is on the screen for more than 5 minutes, the screen gets
dark.)
• Adjust Balance in the AUDIO menu. (Refer to p.14)
• Typical sound due to normal Monitor operation, Monitor is not faulty.
) button.
G
) but-
Advertisement
Table of Contents
