Table of Contents
Advertisement
W
atching DTV Setup
W
atching DTV Setup
- To watch digitally broadcast programs, purchase/connect a digital SET-TOP BOX.
How to connect a user-supplied Digital Set-Top Box
•
You can use either the monitor's Y, P
RGB-DTV INPUT for video connections, depending on your set top box connectors. Then make the corresponding audio
connectons.
•
Connect DTV set-top box audio outputs to monitor AUDIO INPUT jacks.
How to use
1. Turn on the digital SET-TOP BOX. (Refer to the owner's ,manual for the digital SET-TOP BOX.)
2. Press video/pc on the remote control to select Component.
PC Setup
PC Setup
- To enjoy vivid picture and sound, connect a PC to the Monitor.
- Caution: Avoid keeping a fixed image on the monitor's screen for a long period of time. The fixed image may become per-
manently imprinted on the screen; use a screen saver when possible.
- Connect PC to the RGB-PC INPUT(VGA/SVGA) RGB-DTV INPUT(480p/720p/1080i) port of the Monitor: Change the res-
olution output of the PC accordingly.
- Synchronization input form; Separate
Setup Instructions to Connect a PC to your Monitor
- Set the video mode of PC between VGA-SVGA to obtain the best picture quality for the Monitor.
- If the resolution of the PC is over SVGA, connect to the RGB INPUT(VGA/SVGA) port on the Monitor, change the resolution
output of the PC so that it is less than SVGA.
- Connect the signal cable from the monitor output port of the PC to the RGB-PC INPUT(VGA/SVGA) RGB-DTV INPUT
(480p/720p/1080i) port on the Monitor.
- Connect a user-supplied audio cable from the PC to the Audio ports on the Monitor. (Audio cables are not included with
the Monitor)
- If the PC has a sound card, adjust PC sound accordingly.
- If the resolution of PC is over SVGA, connect to the RGB INPUT(VGA/SVGA) port of the Monitor after changing the res-
olution of PC under SVGA.
- If the picture isn't displayed properly if a non-standard PC is connected, contact your dealer for more information.
- Picture noise may be present because of contrast or brightness settings in PC mode. In this case, adjust contrast or bright-
ness level(s) to get better picture quality.
PC Setup
1. Turn on the PC and apply power to the Monitor.
2. Turn on the display, press the power on button on the Monitor's remote control.
3. Use the video/pc button on the remote control to select the RGB input source.
4. Set the resolution output of the PC to less than SVGA (800x600).
Monitor Display Specifications
Monitor Display Specifications
Horizontal
Resolution
Frequency (KHz)
640x350
640x400
640x480
, P
of COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) or the single
B
R
Vertical
Frequency (Hz)
31.468
70.09
37.861
85.08
31.469
70.08
37.927
85.03
31.469
59.94
35.000
66.66
37.861
72.80
37.500
75.00
43.269
85.00
45.913
90.03
Horizontal
Resolution
Frequency (KHz)
53.011
640x480
64.062
35.156
37.879
48.077
800x600
46.875
53.674
56.000
64.016
49.725
832x624
Vertical
Frequency (Hz)
100.04
120.00
56.25
60.31
72.18
75.00
85.06
90.00
100.00
74.55
9
Advertisement
Table of Contents
