Vcr+Cable Box - Zenith D60WLCD Installation And Operating Manual, Warranty

VCR+CABLE BOX

Locate the Antenna/Cable 2 jack on
1
the back of your TV. Connect the cable
that runs from the wall or antenna to
the jack.
Now find the Loop Out jack.
Connect the cable from this jack to
2
the Input jack on the back of your
cable box.
Locate the Output jack on the back of
3
your cable box. Connect this to the RF
or VHF/UHF/CATV In jack on the back
of your VCR.
If you want to connect VCR with TV
directly, Connect the cable from the
Loop Out jack to the RF or
VHF/UHF/CATV In jack on the back of
yor VCR.
Find the composite video and
4
audio jacks on the back of your
VCR, and connect them following
the instructions provided with
your equipment.
You may connect either the com-
posite video or the S-Video cables
to your Entertainment Machine.
(Do not connect BOTH the com-
posite and the S- Video cables. In
the event that you connect both
composite and the S-Video cables,
only the S-Video will work.)
To hear stereo sound from cable or your VCR,
you will need to connect A/V cables as well as
the wire that runs from the VCR to your
Entertainment Machine.
If you want to receive your signals on Channel
3 or 4, locate the Out to TV jack on your VCR.
Connect a cable from the Out to TV jack to the
Antenna/Cable 1 jack on the back of your
Entertainment Machine.
After connecting external equipment to the TV,
don't display still word for hours. It may be
show the split word.
P A G E 1 2
Cable box
In
Out
Cable TV
wall jack
Round wire
(75ohm)
VCR
Back AV panel
In
3 4
Out
S-Video
Audio
Video
R
L
Antenna
OR
RF coaxial wire
(75ohm)
MONITOR VIDEO 2
OUT
A/V cables
not included
with TV
ANT/CABLE2 ANT/CABLE1
LOOP OUT
INPUT INPUT
S-VIDEO
VIDEO
L
MONO
R
VIDEO 1
INPUT INPUT
206-3726