Auto Clock - Zenith D60WLCD Installation And Operating Manual, Warranty

Auto Clock

Sets the time automatically through the PBS broadcast
signal.
This signal includes information for the correct time. Enter
the local PBS channel number with the digit buttons on
your remote control.
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the Time menu.
Press ENTER or the RIGHT arrow button
2
to activate the Time menu.
Press ENTER or the RIGHT arrow button
3
to activate the Auto Clock then press the
UP/DOWN arrow button to make your
auto clock selection.
• Use the digit buttons to set the PBS
channel.
• Time Zone - Lets you select the time
zone of your viewing area.
• Daylight Savings - Lets you set
Daylight Savings On or Off, depending
on whether or not your viewing area
observes Daylight Savings or not.
• If you select Auto Clock, press the
RIGHT arrow to choose On or off.
Press EXIT to save and return to TV view-
4
ing or press the ENTER button to save
and return to the previous menu.
5 Your choices can be saved when Auto
Clock is set.
P A G E 3 8
tv vcr cable dvd sat
mode light power
source
video front
tv
comp1 comp2 rgb
1 2 3
4 5 6
7 8 9
0
enter
mute ratio
vol ch
swap pipch- pipch+ pip
flashbk surf freeze
menu
1
exit
record stop skip
pause rew
play ff
3
2/3/4
1
2/3
4
206-3726