Using Eureka Robot App; Using Amazon Echo Or Google Home; Google Assistant - Eureka NER700 Series Owner's Manual

1. Finish Wi-Fi connecting following above wifi connect guideline
2.On the app's home screen, select Eureka NER700
3.On the next scree you will be able to use the
buttons to start/stop cleaning; change modes,adjust
suction power, recharging.
1. Open Amazon Alexa App
and select
3. Enable the Eureka robot skill
login using your Eureka robot app credentials
5. The Eureka robot skill and the app should now be
successfully linked, and this will be indicated on the
Amazon Alexa app.
the robot:
"Alexa, tell Eureka robot to start cleaning"
"Alexa, tell Eureka robot to stop cleaning"
"Alexa, tell Eureka robot to go home"
Back to
previous page
Remaining
power
Signal
Strength
Select suction
mode
Smart cleaning

Google Assistant

1. Open Google Home App
2. Search for Eureka robot and select
3. Link Eureka robot skill
login using your Eureka robot app credentials
5. The Eureka robot skill and the app should now be
successfully linked
the robot:
"Ask Eureka robot to start cleaning"
"Ask Eureka robot to stop cleaning"
"Ask Eureka robot to go home"
Robot settings
Visual Wall and
No-go zone setting
Map management
Manually control
the robot
Cleaning time
Select water
flow speed
Recharge
More cleaning
mode
www.eureka.com
9