Yamaha VL-7 Owner's Manual page 163

Feature Reference
3.
Press [
Press the [ button. The "Are You Sure?" confirmation display will
appear.
4.
Press - to Transmit
Press the - button to transmit the selected data (or = to cancel the opera-
tion). The progress of the transmission will be indicated in bar-graph form on the display,
and "Completed!" will appear when all the data has been transmitted.
• "All Voice" transmissions can be cancelled between blocks by pressing the
] button. All data up to the point at which the ] button is pressed
will be properly transmitted.
5.
Press ]
Press the ] button to clear the "Completed!" display and return to the main
bulk transmit display.
Bulk Data Reception
In order for the VL7 to receive a bulk transmission from another VL7 or other
device, the MIDI OUT of the transmitting device must be connected to the MIDI IN of
the VL7 via a MIDI cable. The VL7 will then automatically receive and load the data as
long as it is set to the same device number as the transmitting device and its Memory
Protect function is turned "off". Memory Protect does not need to be turned off in order
to receive a single voice (the current voice).
Utility Mode
160