Yamaha VL-7 Owner's Manual page 34

Feature Reference
Voice Name
To enter a new voice name position the cursor at the "Voice Name" parameter
and press [ or • ("Name"). The VOICE NAME display will appear.
Use the cursor , and . buttons to move the cursor to the character in the
•
voice name at the top of the display that you want to change.
Use the = and - buttons or data dial to select a new character by
•
moving through the character list row by row.
Press the ™ button ("Spc") to enter a space at the current cursor position.
•
Press the £ button ("Clr") to clear the entire voice name.
•
Press ] or [ when the voice name is complete.
•
Element Name
This parameter allows a name to be entered for the element of the current voice. To
enter a new element name position the cursor at the "Element Name" parameter and
press [ or • ("Name"). The ELEMENT NAME display will appear. Procedure is
the same as for the Voice Name parameter, above, except for the function of the ¢
button, below.
Press the ¢ button ("Auto") to copy the voice name to the element name.
•
Edit Mode