Yamaha VL-7 Owner's Manual page 178

Feature Reference
The VL7 includes a built-in demonstration which can be played as follows.
Demo Playback Procedure
1.
Check Your Current Voice!
If the currently selected voice has been edited but not stored, the edited data will be
lost when the demo mode is engaged. Make sure the current voice has been stored before
entering the demo mode.
2.
Press [
Press [, then press - in response to the "Are You Sure?" prompt.
The demo selection, start, and stop control display should appear.
3.
Select a Demo
Select the demo you want to play ("Top Song" parameter).
4.
Press • To Run
Press the • button to run the demo. The various demo songs will play in sequence
until stopped.
5.
Press ¶ To Stop
Press the ¶ button to stop demo playback.
• The demo uses some voices which are not provided on the VL7 data disk. To
store a demo voice for your own use, stop demo playback, exit from the demo
mode, then store the voice (it is still in the edit buffer) using the normal voice
store procedure.
• 16 demo pieces are provided. The last of these can be used with full accompa-
niment if the VL7 is connected to a GM (General MIDI) tone generator such
as the Yamaha TG300. Connect the VL7 MIDI OUT connector to the MIDI
IN connector of the GM tone generator module.
Utility Mode
175