Table of Contents
Advertisement
......
_...
172
5E53
Cause:
Action:
The 3262 Printer cover is open or the belt cover is
not in
place.
Ensure that the print cover is closed and the belt
cover is properly in
place.
If the check
indicator is
on:
1.
Press the
Stop/
Reset key on the 3262 Printer.
2.
Press
the
Ready key on the 3262 Printer to
continue system checkout.
3
.
Select option 1 and press the Enter
/
Rec Adv
key at the system console to try again
.
If any one of the above errors continues to occur, call your
hardware service representative and tell him
the
system
reference
code.
Return to
&D
5280
Cause:
Action:
The 3262 Printer has a cable connection problem
.
1.
Set the printer Unit Emergency switch to the
Power Off position
.
2.
Be sure that the three printer cable connectors
are in the correct sockets and are securely
attached.
(See Section 4 of this manual.)
3.
Set the printer Unit Emergency switch to the
Power Enable position.
111111_... Section 8.1 Continued
Advertisement
Table of Contents
