Table of Contents
Advertisement
······~
152
5.
Check both the cable ends (make sure the cables are
connected to the correct sockets and that the connection is
t
ight).
6.
After you make the above checks, go back to
ID
and
start again
.
When you complete step 5, and if you still cannot get display
11 to match Form F (Local Work Station Diagram), do the
following:
a.
Record the address and port number of the device(s)
that does not match Form F (Local Work Station
Diagram).
b.
Continue the system checkout (
llEJ
).
c.
Call your hardware service representative after you
complete the system checkout.
You might also consider trying a different cable
to help find the problem area
.
Advertisement
Table of Contents
