Table of Contents
Advertisement
86
12
Press the
key.
Display 12 appears on the system console momentarily, and
then display 15 appears on the system console.
First Display
Second Display
SYSTEM/36 C HECK.OUT PROGRAM
15
SYSTEM/36 CHECKOUT PROGRAM
Work
station
Work station
Tut
is
running
All disphy sutions (ucept the systHI consoh,) should now display
theiraddress
.
Allworkstat1onp
rinttrsshouldha
Y
e
pr1nted
thefraddress.
Make
sure that theaddruses are correct.
Press ENTER
/
REC ADV key
t
o continue
The 5219 Printer system checkout can be
done with the automatic sheet feed or tractor
feed
attached,
or no attachments. If you have
the automatic sheet feed or tractor feed
attached, make sure you have paper loaded
into the printer according to the steps
described in the 5219 Setup Guide. When
you start system checkout, the system may
prompt you for paper even if you already have
paper loaded in the printer (the Load Paper
light comes on and a message stating the
5219 Printer is out of forms is displayed at
the system
console).
In this case, press the
Start key on the 5219 Printer and ignore the
out-of-forms message displayed at the
system console
.
If the computer finds a problem with any
display station or
printer,
a system reference
code is displayed near the bottom of the
display on the system console
.
If this happens, go to
Em
for instructions
on what to do.
Advertisement
Table of Contents
