Table of Contents
Advertisement
······~
5E83
Cause:
Action:
4
.
Press the printer
Stop/
Reset key.
5.
Press the printer Ready key to continue system
checkout.
6
.
Select option 1 and press the Enter
/
Rec Adv
key at the system
console.
The 3262 Printer is not turned on
.
1.
Be sure that the 3262 Printer is plugged in and
that power is available at the outlet.
2.
If the Unit Emergency switch on the printer is in
the Power Off position, set it
to
the Power
Enable position
.
3.
If
the Unit Emergency switch is set to
Power
Enable, do the following:
a.
Set the 3262 Unit Emergency Printer
switch to Power Off, wait 5 seconds, and
then reset it to the Power Enable position.
b.
Press the 3262 Printer
Stop/
Reset key to
reset
the check condition.
c.
Press the Ready key on the 3262 Printer.
d.
Select option 1 and press the Enter
/
Rec
Adv key at the system console
to
try again
.
111111~
Section 8.1 Continued
•
Responding to System Reference Codes and Other Problems
173
Advertisement
Table of Contents
