Calling Using Speed Dial Key; Making A Peer To Peer Sip Call - Alcatel-Lucent ALE-2 User Manual

Use one of the following:
Call
If you are using multiple SIP accounts on your phone, you can choose which account to use to make the call.

3.3.6 Calling using Speed Dial key

You can pre-define the speed dial by long pressing the program key to the right of the LCD, entering the "Program
Keys" setting page, choosing "Speed Dial" as Key Type, and inputting the number to be called and account.
If you are using multiple SIP accounts on your phone, you must choose which account to use to make the call.

3.3.7 Making a peer to peer SIP call

Your phone is compatible with the peer to peer IP call. It is able to call phones connected to the same local
network. You can call your contact by entering the IP address of your contact's deskphone.
The format of the entered IP address must be x*x*x*x where x is a decimal value between 0 and 255.
This feature is useful when you have no connection to a communication server (no registration, network
problems, etc.). Not all the features are available. Should this occur and the phone's status should be displayed on
the screen. This feature can be deactivated by your administrator.
3.4 Receiving a call
When receiving a call, you can:
Take or
or Reject
ALE-2/ALE-3 Basic DeskPhone User Manual 8AL91438ENABed01
Select the contact to call.
Press the Dial key. Make the call with the active device: handset if unhooked, headset
if connected, otherwise in handsfree mode.
Press the OK key to make a call.
Press the Call soft key to start the call.
Long press to choose Speed Dial.
Open the dialer.
Enter the IP address of the peer end, such as 10*0*0*1, then dial out.
Unhook the handset to take the call.
Press the Headset key to activate the headset and take the call.
Press the Loudspeaker/Handsfree key to take the call in handsfree mode.
Press the blinking line key to take the call.
Take the call with the headset if connected, or in handsfree mode.
Transfer the call to your voicemail.
18