Alcatel-Lucent ALE-2 User Manual page 59

Receiving a call
Lift the handset to take the call
Use the headset to take the call
Press the Loudspeaker/Handsfree key to take the call in handsfree mode.
Press the blinking line key associated with the SIP account.
Take the call with the headset if connected, or in handsfree mode.
Take or
Transfer the call to your voicemail.
or Reject
call
Forward Transfer the call to another contact.
During conversation
End End the call
Hold Call holding
Transfer Call transfer
Resume Retrieve a call (on hold, parked)
New Make a new call during a conversation
Swap Switch between two calls
Conf Establish a multi-party conference call
Exit the conference call as a participant or end the conference call for all participants as an
End conf
organizer
Toggle the microphone on or off
Basic settings
Menu Press the soft key settings.
Select the melody
→
Basic Setting
Adjust the ringer volume
→
Sound
Configuring the ring mode
Ringing
Configuring the beep mode
→
Basic Setting
→
Sound DTMF To activate or deactivate the DTMF mode.
Tone
Adjust the ringer volume
→
Basic Setting
Selecting a language
Language
Adjust the brightness when the phone is in use.
→
Basic Setting
Adjust the brightness when the phone is not in use.
Display
Set the delay before the screen saver starts.
Status Display IP and MAC addresses and software version.
Access phone features: Call Forward, DND, Auto Answer, Programmable Key, Anonymous,
Features
Key As Send, Hotline, Default Account, Intercom.
Menu Press the soft key settings.
Related Documentation - Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site: https://www.al-enterprise.com/products. 8AL91438ENABed01 -
The Alcatel-Lucent name and logo are trademarks of Nokia used under license by ALE. ALE International copyright © 2022
Homepage
Use 4 soft keys at the bottom of the screen to access features, configure the phone, or
Soft keys
manage calls.
Use programmable keys on the right side of the screen to customize different features of
Programmable the phone.
keys Press the programmed key to use the corresponding feature (e.g., call contacts).
Long press the programmed key to enter into the key configuration page.
Use the "1234" key at the lower right corner of the screen to turn pages (4 pages in total).
Turn pages Use the left-right navigation keys or the "1234" key to navigate between pages. The
number of the displayed page is highlighted.
Display the status information including the network status and phone status at the top of
Status bar
the screen.
Default mode: Date and time in the middle of the screen.
Date and time
Extended mode: Date and time at the top right corner of the screen.
OK key: Press this key to validate your choices while programming keys or configuring the
phone or view the phone status in idle state.
Left-right navigation key: Use the key to move from one page to another in the homepage,
move the cursor in a text box or move from one tab to another in different application.
Up-down navigation key: Use the key to select an option from a list.
C key Cancel key: Use this key to go back to the previous step.
Call management screen
Soft keys on the lower part of the screen display different features available depending on the call status.
Soft keys
Press the soft key to select the corresponding feature.
Call display
Call information such as the duration, number, and caller name is displayed in the middle of the screen.
screen