Upgrading And Provisioning; Upgrade And Provisioning Configuration - Grandstream Networks WP810 User Manual

https://documentation.grandstream.com/knowledge-base/connecting-gds37xx-with-wp820/

UPGRADING AND PROVISIONING

The WP810/WP822/WP825 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server and selecting a
download method. Configure a valid URL for TFTP, HTTP or HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
fw.mycompany.com

Upgrade and Provisioning Configuration

There are two ways to setup upgrade and provisioning on WP810/WP822/WP825. They are Keypad Menu and Web GUI.
Configure via keypad Menu
1. In handset Settings, select Advanced Settings �� System Upgrade.
2. Navigate to Firmware/Config and configure the firmware upgrade and config settings.
Configure via Web GUI
Open a web browser on PC and enter the IP address for the handset. Then login with the administrator username and password. Go to Maintenance ��
Upgrade and Provisioning �� Firmware. In the Upgrade web page, enter the IP address or the FQDN for the upgrade server and choose to upgrade via
TFTP, HTTP, HTTPS, FTP or FTPS (The default setting is HTTP). Save and apply the changes, press Save and apply button then reboot the phone to initiate
firmware upgrade process.
Warning
Figure 62: Upgrade Configuration via Keypad Menu
Figure 63: Upgrade Configuration via Web GUI