Register A Sip Account; Register Account Via Web User Interface; Register Account Via Lcd Menu - Grandstream Networks WP810 User Manual

Register a SIP Account

The WP810/WP822/WP825 supports up to 2 SIP accounts and they can be configured either using the web GUI or via the keypad menu as described on the
following section.

Register Account via Web User Interface

1. Access your handset base station web UI by entering its IP address in your favorite browser.
2. Enter your admin's username and password (default username and password: admin/ Random Password from the sticker on the back of the unit).
3. Press Login to access your settings.
4. Go to Account tab and select the account to configure.
5. In General Settings, set the following:
Account Active to Yes.
Account Name: Any name to identify this specific user.
SIP Server field with your SIP server IP address or FQDN.
Secondary SIP Server with your secondary SIP server IP address or FQDN. Leave empty if not available.
SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to phone number or actually a
phone number.
Authenticate ID: SIP service subscriber authenticate ID used for authentication. Can be identical to or different from SIP User ID.
Authenticate Password: SIP service subscriber's account password to register to SIP server of ITSP. For security reasons, the password field will be
shown as empty.
Outbound Proxy with your outbound proxy IP address or FQDN. Leave empty if not available.
6. Press Save and Apply to save your configuration.
After applying your configuration, your phone will register to your SIP Server. You can verify if your device has registered with your SIP server from its web
interface under Status �� Account Status ("Registered" with green color when the account is correctly registered, or "Unregistered" with red when the
account is not properly registered)

Register Account via LCD Menu

To register your SIP account via the LCD menu, please refer to following steps:
1. Unlock your handset and press Menu to bring up operation menu.
2. Use arrow keys to reach Settings and then select Account tab.
3. Select which account you want configure and then set the following:
Enable Account to "Enable".
Account Name: Any name to identify this specific user.
SIP Server field with your SIP server IP address or FQDN.
SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to phone number or actually a
phone number.
SIP Authenticate ID: SIP service subscriber authenticate ID used for authentication. Can be identical to or different from SIP User ID.