Table of Contents
Advertisement
5
[4] DIGITAL MAIN ASSY and
DAC HIGH ASSY
Remove the Bonnet (Box) by removing the 18
screws.
-----------------------------------------------------------------
[4-1] DIGITAL MAIN ASSY and
DAC HIGH ASSY
(1) Release the Housing(D) (ADX7821) from the
PCB binder.
∗27
D-AUDIO
BRIDGE ASSY
Front
Note on assembling
∗27: Twist the PCB binder around the Housing(D)
(ADX7821) so that it doesn't touch to the
DIGITAL MAIN ASSY, D-AUDIO BRIDGE
ASSY and the Bonnet (Box).
(2) Release the cables from the two PCB binders.
Note on assembling
∗28: Twist the PCB binders around the cables
(direction of the blue arrow), so that they
don't touch to the Fuse and the capacitor.
(3) Remove the HDMI Cable (ADX7732) by
disconnect the connector, and then connect
the another normal HDMI Cable.
Note: Don't connect the HDMI Cable (ADX7732)
provided with the product to prevent
damage to the HDMI connector for the
DIGITAL MAIN ASSY. Instead, use the
another normal HDMI Cable to prevent a
load from being applied to the HDMI
connector.
Always connect the HDMI Cable because
the Wireless LED blinks, which causes a
shutdown, if the power is turned on without
the cable connected.
(4) Cut the three Binders.
(5) Release the cable from the two PCB binders.
Note on assembling
∗29: PCB binders tilt in the direction of the blue
arrow.
(6) Disconnect the four connectors.
(7) Remove the screw. (BBZ30P060FCC)
Notes on assembling
∗30: PCB binder tilt in the direction of the blue
arrow.
∗31: Bind the HDMI Cable (ADX7732) and the
Housing(D) (ADX7821) as numerical order
of blue numbers.
5
6
Front
DIGITAL MAIN
ASSY
∗27
∗27
1
∗31
1
2
HDMI Cable
3
Front
SC-95
6
7
CONNECT_S ASSY
4
CN603
CN602
CN601
1
5
Housing(D)
USB RECT_S ASSY
Front
∗28
HDMI Cable
JA8003
5
7
4
7P cable (ADX7776)
39P FFC
∗30
6
Housing(D)
7
8
JA9620
6
x 2
4
HDMI Cable
7
6
4
5
∗29
∗29
39P FFC
V-REG_S ASSY
Fuse
2
∗28
FRONT HDMI
3
USB ASSY
∗28
57
8
A
B
C
D
E
F
Advertisement
Table of Contents
