Pioneer SC-95 Service Manual page 55

5
(4) Connect the two 24P board to board
extension jig cables. (GGD1871)
(IR BUFFER_S CN6802 <-> IR INTERFACE_S
CN3801)
(IR BUFFER_S CN6803 <-> IR INTERFACE_S
CN3802)
Note:
∗25: Doesn't touch the IR BUFFER_S ASSY to
the AUDIO ASSY.
(5) Connect the Rear Panel to the Chassis /65
Ground and GND point of the D AMP_SS
ASSY or D AMP_S ASSY.
(Refer to the "Ground Points" for the GND
point of the D AMP_SS ASSY or D AMP_S
ASSY.)
[3-3] Remove the D AMP_SS ASSY or
D AMP_S ASSY
(1) Remove the GND cable, two 24P board to
board extension jig cables (GGD1871) and
the PRIMARY ASSY.
(Refer to the step (5) to (3) of "[3-2]
Diagnosis".)
(2) Remove the IR INTERFACE_S ASSY.
(3) Disconnect the five connectors.
(4) PuII out the cables from the holes.
4
4
3
INTERFACE_S ASSY
Front
5
6
Front
Front
4
SC-95/CUXJ:
SC-LX59-K/SYXJ8: D AMP_S ASSY
19P FFC
SC-LX59-S/SYXJ8
CN7006
6
7
IR BUFFER_S ASSY
CN6802
∗25
CN6803
AUDIO ASSY
CN3802
IR INTERFACE_S ASSY
SC-95/CUXJ: D AMP_SS ASSY
SC-LX59-K/SYXJ8: D AMP_S ASSY
SC-LX59-S/SYXJ8
CN4004
3
x 4
CN4003
CN4002
CN4001
D AMP_SS ASSY
SC-95
7
8
4
24P board to board extension
jig cable (GGD1871) x 2
CN3801
4
Rear Panel
5
Chassis /65
IR INTERFACE_S ASSY
2
x 9
8
A
B
C
D
E
F
55