Pioneer SC-95 Service Manual page 48

1
(12) Remove the two screws.
(
SC-95/CUXJ
SC-LX59-K/SYXJ8
A
( SC-LX59-S/SYXJ8 : BBZ30P080FNI)
(13) Remove the four screws. (ABA1193)
(14) Remove the three screws. (BBT30P080FCC)
(15) Unhook the two hooks.
(16) Remove the Front Section.
[1-2] Diagnosis
(1) Arrange the unit as shown in the photo.
(2) Connect the another normal HDMI Cable to
B
the DIGITAL MAIN ASSY and the FRONT
HDMI USB ASSY.
JA9620
DIGITAL MAIN ASSY
HDMI Cable
C
2
FRONT HDMI USB ASSY
[2] Rear Section
Remove the Bonnet (Box) by removing the 18 screws.
D
-----------------------------------------------------------------
[2-1] Rear Section
(1) Release the Housing(D) (ADX7821) from the PCB binder.
Note on assembling
∗15: Twist the PCB binder around the Housing(D) (ADX7821),
so that it doesn't touch to the DIGITAL MAIN ASSY,
D-AUDIO BRIDGE ASSY and the Bonnet (Box).
(2) Release the cables from the two PCB binders.
Note on assembling
∗16: Twist the PCB binders around the cables (direction of the blue arrow),
E
so that they don't touch to the Fuse and the capacitor.
(3) Remove the HDMI Cable (ADX7732) by disconnect the connector, and
then connect the another normal HDMI Cable.
Note: Don't connect the HDMI Cable (ADX7732) provided with the product to
prevent damage to the HDMI connector for the DIGITAL MAIN ASSY.
Instead, use the another normal HDMI Cable to prevent a load from
being applied to the HDMI connector.
Always connect the HDMI Cable because the Wireless LED blinks,
which causes a shutdown, if the power is turned on without the cable
F connected.
48
1
2
)
: BBZ30P080FTB
HDMI Cable
2
JA8003
2
3
13
Front Section
14
15
Note: Always connect the HDMI Cable because the Wireless LED
blinks, which causes a shutdown, if the power is turned on
without the cable connected.
Front
Housing(D)
∗15
DIGITAL MAIN ASSY
USB RECT_S ASSY
HDMI Cable
SC-95
3
4
12 12
• Bottom View
16
14
15
• Top View
1
Front Section
∗15
1
1
D-AUDIO
BRIDGE ASSY
Fuse
∗16
2
FRONT HDMI
USB ASSY
3
JA8003
∗16
4
13
14
∗15
Front
∗16
Front