Pioneer SC-95 Service Manual page 52

1
(7) Connect the another normal HDMI Cable
from the FRONT HDMI USB ASSY.
A
Note: Don't connect the HDMI Cable (ADX7732)
provided with the product to prevent
damage to the HDMI connector. Instead,
use the another normal HDMI Cable to
prevent a load from being applied to the
HDMI connector.
Always connect the HDMI Cable because
the Wireless LED blinks, which causes a
shutdown, if the power is turned on without
the cable connected.
(8) Connect the 29P board to board extension
B
jig cable. (GGD1856)
(DIGITAL MAIN CN603 <-> CONNECT_S CN7952)
(9) Connect the 5P board to board extension jig
cable. (GGD1857)
(DIGITAL MAIN CN602 <-> CONNECT_S CN7951)
(10) Connect the 5P PH Housing ASSY extension
jig cable. (GGD1594)
C
(A-REG_S CN7502 <-> AUDIO PF05PG-S20)
(11) Connect the 24P board to board extension
jig cable. (GGD1871)
(PRE BRIDGE_S CN6951 <-> IR BUFFER_S CN6801)
(12) Attach the PRE BRIDGE_S ASSY to the
AUDIO ASSY.
D
(13) Connect the Rear Panel to the Chassis /65
Ground and GND point of the D AMP_SS
ASSY or D AMP_S ASSY.
E
(Refer to the "Ground Points" for the GND
point of the D AMP_SS ASSY or D AMP_S
ASSY.)
F
52
1
2
DIGITAL MAIN ASSY
CN603
Front
PF05PG-S20
Front
5P PH Housing ASSY
extension jig cable (GGD1594)
SC-95/CUXJ: D AMP_SS ASSY
SC-LX59-K/SYXJ8: D AMP_S ASSY
SC-LX59-S/SYXJ8
2
3
HDMI Cable
7
CN602
9
JA9620
8
29P board to board extension
jig cable (GGD1856)
24P board to board
extension jig cable (GGD1871)
AUDIO ASSY
PRE BRIDGE_S ASSY
10
10
SC-95
3
4
8
9
CN7952
CN7951
CONNECT_S ASSY
5P board to board extension
jig cable (GGD1857)
CN6951
11
12
A-REG_S ASSY
11
CN6801
CN7502
IR BUFFER_S ASSY
Rear Panel
13
Chassis /65
4