Confirmation Of The Network Module - Pioneer SC-95 Service Manual

1

5.3 CONFIRMATION OF THE NETWORK MODULE

Check if the set SSID of this unit is displayed on a device such as a PC or a smart phone, following the procedures shown below.
If the SSID is displayed on the device, the antenna connections of the Network Module are normal.
A
If the SSID is not displayed, check the antenna cable connections on the Network Module.
Procedures:
1 Press "Home Menu" button on a remote control and
select "Network Connection" from the Network, Bluetooth
menu on screen.
1
B
1
C
2 Select "Wireless Direct" from the Network Connection
menu.
D
E
F
40
1
2
2
2
3
3 Select the encryption method to "None" with  /  from
Security Protocol.
4 Select "Frequency Band" at  and select the frequency
to "2.4GHz".
5 Select "OK" then press ENTER. "Setting change?" window
is displayed, then select "YES" and press ENTER.
5
6 Select the SSID shown on the screen of this unit.
(e.g. WirelessDirectX: XXXXXX)
SC-95
3
4
3
4
5
6
4