Household AC Outlet
~
©
Measuring !nstrument
GND terminal
(Ex:Distortion Factor Meter)
Resistor
(IMQ)
® When using the instrument's GND terminal
Wrist strap
for measurement, insert the power cord plug
(Anti~ static bracelet)
so that it GND side is connected to the
ground side of the power source.
(2) When disconnecting the head FPC from the Mechanism P.C.B., install a shorting clip on the FPC to protect it
from magnetic or electrostatic damage.
(3) * Use a ceramic screwdriver
for all head replacement and adjustment.
¢ Keep magnetized metallic screwdrivers away from the head assembly, as they may damage
the
head's magnetic properties.
Ceramic screwdriver
(HOZAN D-281, ® No. 0)
N
Je
oS
Shorting clip
Be sure to short this position.
SS
,
(Use the shorting clip.)
3:
Sop
ni A