Table of Contents
Advertisement
Insert Method (Plug-in Editor only)
Offset
When this is selected, only the parameters whose values have been changed from the
default value will be inserted.
All
When this is selected, all parameter values will be inserted, whether they've been
changed or not.
Interval
This determines the amount of time (in clocks) that separates each insertion. If the tone
generator or sound card "chokes" on the incoming MIDI data, or host application has
trouble sending all the data properly, or the Harmony effect doesn't seem to work as
expected, try setting the Interval to a higher number.
Easy Setup....................................................................
• This function is not supported in Macintosh stand-alone application.
Harmony Channel
Range: 1 ... 16
This determines the MIDI channel over which the Harmony effect (Vocoder or Chordal) is
controlled . For example, when this is set to the same value as the MIDI transmit channel
of a connected MIDI keyboard or sequencer, you can use that device to "play" harmonies.
(This is the same parameter as in the System tab of the VH Effect Editor; however, the
"off" setting is not available here.)
Sequencer-related Operations /
27
Setup Menus
Advertisement
Table of Contents
