Table of Contents
Advertisement
Harmony 1 - 3 Volume
Range: 0 ... 127
Default: 127
This determines the volume of the selected harmony note (1, 2, or 3).
Harmony 1 - 3 Pan
Settings: Random, -63 (full left) ... 0 (center) ... +63 (full right)
Default: 0
This determines the stereo position of the selected harmony note (1, 2, or 3). The "Ran-
dom" setting randomly assigns the selected harmony note to a pan position.
Harmony 1 - 3 Detune
Range: -64 ... +63
Default: 0
This determines the amount of detuning for the selected harmony note (1, 2, or 3). A set-
ting of "0" results in no detuning; positive and negative settings adjust the pitch of the har-
mony note up or down, respectively.
This tab section allows you to specify the chord for the Harmony effect. To select a
chord, click one of the twelve root notes and one of the thirty-four types. (Both the root
note and type must be specified.)
To insert the chord to an host application's track, drag and drop the Chord tab to the
desired track (the chord event is inserted to the nearest measure), or use the Insert VH
Effect Editor Parameter command in the Edit menu.
Chord Parameters
21
Parameters /
Chord Parameters
Advertisement
Table of Contents
