Yamaha MU100R Sound List page 42

The currently-sounding harmony notes are numbered
sequentially beginning from the lowest note.
When the value is 0, panning will be random.
For random panning with Vocoder harmony, the pan
position will change at each key-on.
For random panning with Chordal harmony, the pan
position will change whenever the chord changes.
For Detune and Chromatic harmony, random pan will
not function, and the panning will be centered.
02 32 mm Harmony 1 Pan
mm : 00, 01 - 64 - 127
(random, Lch...center...Rch)
02 33 mm Harmony 2 Pan
mm : 00, 01 - 64 - 127
(random, Lch...center...Rch)
02 34 mm Harmony 3 Pan
mm : 00, 01 - 64 - 127
(random, Lch...center...Rch)
The following NRPN numbers independently control
the detune amount for each harmony sound.
The currently-sounding harmony notes are numbered
sequentially beginning from the lowest note.
02 48 mm Harmony 1 Detune
mm : 00 - 64 - 127 (-64...0...+63)
02 49 mm Harmony 2 Detune
mm : 00 - 64 - 127 (-64...0...+63)
02 50 mm Harmony 3 Detune
mm : 00 - 64 - 127 (-64...0...+63)
4.1.2.4 RPN (Registered Parameter Number)
This message is used to set Pitch Bend Sensitivity.
RPN MSB and RPN LSB are used to specify the parameter which is to be controlled, and subsequently Data Entry (refer to
1.2.1) is used to set the value of the specified parameter.
Only the MSB of Data Entry is recognized.
Control# Parameter
100 RPN LSB
101 RPN MSB
The following RPN numbers are recognized.
RPN Data Entry
Parameter name and range of values
MSB LSB MSB
00 00 mm Pitch Bend Sensitivity
mm : 00 - 24 (0...24 semitones)
Settable in semitone steps over a two-octave range
127 127 -- RPN null
Set RPN and NRPN numbers to a condition in which
no numbers have been specified.
Internal settings will not be affected.
4.1.2.5 All Note Off
For Vocoder harmony, this message turns off all currently-sounding harmony notes.
Control# Parameter
123 All Note Off
Data Range
0...127
0...127
Data Range
0
MIDI
MIDI data format
X
X
X
X
X
X
Harmony ch Melody ch
41