Yamaha MU100R Sound List page 41

MIDI data format
4.1.2.2 Hold1
This message controls sustain pedal on/off.
Control#
64
When ON, currently-sounding notes will be sustained even after note-off is received.
4.1.2.3 NRPN (Non-registered parameter number)
This message is used to set sound parameters such as vibrato or detune, etc.
The NRPN MSB and NRPN LSB specify the parameter which is to be controlled, and subsequently Data Entry (refer to 1.2.1)
is used to set the value of the specified parameter. Only the MSB of Data Entry is recognized.
Control#
98
99
The following NRPN messages are recognized.
NRPN
MSB LSB
00 00
01 08
01 09
01 10
01 26
02 16
02 17
02 18
40
Parameter Data Range
Hold1 0...63, 64...127
(OFF, ON)
Parameter Data Range
NRPN LSB 0...127
NRPN MSB 0...127
Data Entry
Parameter name and range of values
MSB
mm Harmony Mute
mm : 00 - 63 (off), 64 - 127 (on)
mm Vibrato Rate Modulation
mm : 00 - 64 - 127 (0...127)
Melody channel is effective only when Gender is ON.
mm Vibrato Depth Modulation
mm : 00 - 64 - 127 (0...127)
Melody channel is effective only when Gender is ON.
mm Vibrato Delay Modulation
mm : 00 - 64 - 127 (0...127)
Melody channel is effective only when Gender is ON.
mm Detune Modulation
mm : 00 - 127 (0...127)
Controls the overall amount of detune specified for the
individual voice.
The following NRPN numbers independently control
the volume of each harmony note.
The currently-sounding harmony notes are numbered
sequentially beginning from the lowest note.
mm Harmony 1 Volume
mm : 00 - 127 (0...127)
mm Harmony 2 Volume
mm : 00 - 127 (0...127)
mm Harmony 3 Volume
mm : 00 - 127 (0...127)
The following NRPN numbers independently control
the panning of each harmony note.
MIDI
Harmony ch Melody ch
X
Harmony ch Melody ch
Harmony ch Melody ch
X
X
X
X
X